Roland PCR-30, PCR-50, PCR-80 Program Change mode (PROGRAM CHANGE)

Basic operation

Program Change mode (PROGRAM CHANGE)

This mode lets you transmit a program change message on the current channel.

fig.PC-1_80

1

3 1 2

Press the [PROGRAM CHANGE] button.

The [PROGRAM CHANGE] button will light. The display will indicate the program change that was transmitted most recently.

* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 158).

2

3

Use the [DEC][INC] buttons or the [0]–[F]keys of the keyboard to specify the program change you want to transmit.

DEC Change the current value by -1

INC Change the current value by +1

The input value

0–FHEX...00–7F DECIMAL...1–128

Press the [ENTER] button.

The setting will be cancelled if you press another button instead of the [ENTER] button. The program change has now been transmitted.

119