Edit mode (EDIT)

■Setting method D

4

Perform steps 1–3.

Use the [DEC][INC] buttons or the [0] or [1] keys to specify the USB DRIVER MODE.

 

 

FPT technology is used to perform high-speed

0

Original driver

MIDI transfer. Normally, we recommend that

 

 

you use this mode.

1

Generic driver

Select this if you are using the standard MIDI

driver provided by your operating system.

 

 

*FPT = Fast Processing Technology for MIDI Transmission:

Effective use is made of the USB bandwidth according to the amount of MIDI data to be transmitted, ensuring that MIDI data processing will always occur optimally.

5

Press the [ENTER] button.

■Setting method E

4

5

Perform steps 1–3.

Use the [DEC][INC] buttons or the [0] or [1] keys to specify the GM2/LAST ACCESS MEMORY setting.

 

 

When the PCR starts up, memory number 0 (GM2) will

0

GM2 MEMORY

be loaded into current memory (p. 148) regardless of the

 

 

state in which the power was turned off.

 

LAST ACCESS

Upon power-up, the PCR-30/50/80 will recall the

1

memory that was last recalled or saved into current

MEMORY

 

memory (p. 148) .

 

 

Press the [ENTER] button.

■Setting method F

Perform steps 1–3.

4

The display will indicate “RST”.

5

Press the [ENTER] button.

6

The display will blink “YES”.

7

Press the [ENTER] button.

156