Edit mode (EDIT)

Advance mode 1, 2

Advanced mode 1 of PROGRAM CHANGE ASSIGN lets you specify the upper and lower limits of the program change value. Advanced mode 2 lets you transmit BANK LSB/MSB settings in addition to the program change.

1.Press the [EDIT] button.

2.Slightly move the controller to which you want to assign a Program Change message. In the case of a button, press that button. The display will indicate the number of the selected controller.

3.Confirm what’s indicated, and press the

[ENTER] button.

Advanced mode 1—Specifying the range of values

4.Press the [PROGRAM CHANGE] key and then press key [1].

5.Press the [ENTER] button.

6.Input the channel.

7.Press the [ENTER] button.

8.The following display will appear.

fig.max

Advanced mode 2 —Transmitting bank data

4.Press the [PROGRAM CHANGE] key and then press key [2].

5.Press the [ENTER] button.

6.Input the channel.

7.Press the [ENTER] button.

8.Specify the bank select MSB (CC#00). Use the [DEC][INC] buttons or the [0]–[F]keys to

specify the MSB.

fig.BANK-2

*1 Reference

9.Press the [ENTER] button.

10.Specify the bank select LSB (CC#32). Use the [DEC][INC] buttons or the [0]–[F]keys to specify the LSB.

fig.BANK-3

*1 Reference

*1 Reference

9.Use the [DEC][INC] buttons or the [0]–[F]keys to specify the upper value limit.

10.Press the [ENTER] button.

11.The following display will appear.

fig.min

*1 Reference

12.Use the [DEC][INC] buttons or the [0]–[F]keys to specify the lower value limit.

13.Press the [ENTER] button.

11.Press the [ENTER] button.

12.Input the program change number.

13.Press the [ENTER] button.

14.The display will indicate “P--”.

fig.p1

*1 Reference

15.Specify the output port. (➔“Specifying the port” (p. 159))

136

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or

mode of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently

set value, or will blink if the value is different.