Edit mode (EDIT)

■PROGRAM CHANGE ASSIGN

Here’s how to assign a program change message to a controller.

Mode

Number

Effect

Bank

Port

 

 

 

 

 

Basic mode

0

Fixed value

Not output

PCR 1

Advanced mode 1

1

Assignable range of values

Not output

PCR 1

Advanced mode 2

2

Fixed value

Output

Assignable

Advanced mode 3

3

PC DEC

Not output

KEYBOARD PORT (p. 154)

Advanced mode 4

4

PC INC

Not output

KEYBOARD PORT (p. 154)

Basic mode

1

2

Press the [EDIT] button.

The display will indicate “EDT.”

Slightly move the controller to which you want to assign a Program Change message. In the case of a button, press that button.

The display will indicate the number of the selected controller.

3

4

Confirm what’s indicated, and press the [ENTER] button.

Press the [PROGRAM CHANGE] key.

The display will indicate “PC0”.

5 Confirm what’s indicated, and press the [ENTER] button.

 

The display will indicate “C--”.

*1 Reference

6

Input the channel. Use the [DEC][INC] buttons or the [0]–[F]keys to specify the channel.

7

Press the [ENTER] button.

The display will indicate “N--”.

*1 Reference

8

9

Use the [DEC][INC] buttons or the [0]–[F]keys to specify the program change number.

Press the [ENTER] button.

*If you assign Basic mode to [S1--S8], [R1--R8], or [P2], moving the controller from the minimum to the maximum position will transmit the assigned control change messages.

*1 The -- area displays the currently set value. If it has not been set, the default setting will be displayed. Even if you change the type or mode 135 of the MIDI message that is assigned, the default setting will be displayed. This will be lit if the value is the same as the currently set value,

or will blink if the value is different.