Controls and Functions

1.DISPLAY STAND

Optional accessory for tabletop installations.

2.REMOTE CONTROL SENSOR

Receives the signals from the remote control.

3.AMBIENT LIGHT SENSOR (SP-42 and SP-50 only)

This sensor measures the light level in the viewing area; it is active when the Energy Mode is set to Auto (refer to Energy Mode on page 41 for more information).

4.STANDBY/ON INDICATOR

-Lights green to indicate normal operation;

-Flashes green (once per second) when the AUTO OFF feature is active.

-Lights red to indicate that the CinemaWall is in standby mode;

-Flashes green or red (twice per second) to indicate an error condition.

5.HANDLES

ALWAYS use the handles when carrying the unit.

6.STANDBY/ON BUTTON ( )

Press to put the display into operation or standby mode.

7.MENU

Press this button to show or hide the On-Screen Display (OSD) controls.

8.INFO/SET

When the OSD controls are visible on-screen, press this button to select an OSD sub-menu or confirm a changed setting.

When no OSD appears on-screen, press this button to display the currently-selected input, aspect ratio and input signal characteristics (resolution, timing etc.).

9.INPUT/UP ( )

Press this button to switch inputs or move the cursor up in the current OSD menu.

10.ASPECT RATIO/DOWN ( )

Press this button to change the aspect ratio (screen size) or move the cursor down in the current OSD menu.

11.LEFT ( ) / VOL – and RIGHT ( ) / VOL +

These decrease or increase the volume of sound from the speakers, or move the cursor left or right in the OSD mode.

6 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual

Page 16
Image 16
Runco SP-50, SP-42, SP-60 manual Display Stand