Runco SP-42, SP-50, SP-60 manual Analog RGB OUT Input 1 Connection, Standby mode

Installation

ANALOG RGB OUT (INPUT 1) Connection: The CinemaWall has an RGB output for looping the signal received at INPUT 1 out to a second RGB display device. Connect the second display device to the ANALOG RGB OUT connector as shown in Figure 3-4.

		INPUT1
ANALOG RGB OUT	ANALOG RGB IN
(D-Sub)		(D-Sub)

To external monitor

Figure 3-4. ANALOG RGB OUT (INPUT 1) Connection

A video signal is not output when the CinemaWall is powered off or in

Note standby mode.

DVI-D (INPUT 2) Connection: The CinemaWall has a DVI-D input for connecting a personal computer, DVD player, DTV decoder or any other device with a DVI output. Connect such devices to INPUT 2 as shown in Figure 3-5.Use a 24-pin, DVI-D (digital only) cable.

INPUT2

DIGITAL RGB (DVI-D)

Figure 3-5. DVI-D (INPUT 2) Connection

20 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual