Runco SP-42, SP-50 FMKS00, FMKS02, FMKS03, FMKS04, FMKS05, FMKS06, FMKS07, Mal, Tone, Contrast

Serial Communications

Table 6-1. Serial Commands (continued)

	Command		Value Range		Description
ASCII		HEX	Minimum	Maximum
CLMS01		43 4C 4D 53 30 31	–	–	Sets the ISF SETTING to ISF CCC.
FCA		46 43 41	–	–	Sets FAN SPEED to AUTO.
FDT		46 44 54	–	–	Executes FUNCTION RESET.
FCM		46 43 4D	–	–	Sets FAN SPEED to MAX.
FMKS00		46 4D 4B 53 30 30	–	–	Sets the TEST PATTERN to OFF.
FMKS02		46 4D 4B 53 30 32	–	–	Sets the TEST PATTERN to INVERSE
					(negative-positive inversion).
FMKS03		46 4D 4B 53 30 33	–	–	Turns ON the WHITE test pattern.
FMKS04		46 4D 4B 53 30 34	–	–	Turns ON the RED test pattern.
FMKS05		46 4D 4B 53 30 35	–	–	Turns ON the GREEN test pattern.
FMKS06		46 4D 4B 53 30 36	–	–	Turns ON the BLUE test pattern.
FMKS07		46 4D 4B 53 30 37	–	–	Turns ON the YELLOW test pattern.
FRCS00		46 52 43 53 30 30	–	–	Sets FRC to SCALER.
FRCS01		46 52 43 53 30 31	–	–	Sets FRC to NORMAL.
GSL		47 53 4C	000	255	Adjusts the GREEN sidebar level.
IDC		49 44 43	–	–	Clears the display ID number (resets to
					“ALL”); for example, 01IDC.
IDS		49 44 53	–	–	Sets the display ID number; for exam-
					ple, 01IDS sets the display ID to 01h.
					Note: IDS only works if the display ID
					number has been cleared (with IDC) or
					has not been previously assigned.
IPRS01		49 50 52 53 30 31	–	–	Sets the DISPLAY PROFILE to NOR-
					MAL.
IPRS02		49 50 52 53 30 32	–	–	Sets the DISPLAY PROFILE to PURE.
IPRS03		49 50 52 53 30 33	–	–	Sets the DISPLAY PROFILE to MONO-
					TONE.
IPRS04		49 50 52 53 30 34	–	–	Sets the DISPLAY PROFILE to HIGH
					CONTRAST.
LESS00		4C 45 53 53 30 30	–	–	Sets FRONT L.E.D. to OFF.
LESS01		4C 45 53 53 30 31	–	–	Sets FRONT L.E.D. to ON.
Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

62 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual