Runco SP-60, SP-42, SP-50 manual Low, High

Serial Communications

Table 6-1. Serial Commands (continued)

	Command		Value Range		Description
ASCII		HEX	Minimum	Maximum
CTPS05		43 54 50 53 30 35	–	–	Sets COLOR TEMP. to HIGH.
CTRS00		43 54 52 53 30 30	–	–	Sets CHROMA EE to OFF.
CTRS01		43 54 52 53 30 31	–	–	Sets CHROMA EE to ON.
DBLS01		44 42 4C 53 30 31	–	–	Sets BLACK LEVEL for INPUT 2 to
					LOW.
DBLS02		44 42 4C 53 30 32	–	–	Sets BLACK LEVEL for INPUT 2 to
					HIGH.
DNRS00		44 4E 52 53 30 30	–	–	Sets the VIDEO NR to OFF.
DNRS01		44 4E 52 53 30 31	–	–	Sets the VIDEO NR to LOW.
DNRS02		44 4E 52 53 30 32	–	–	Sets the VIDEO NR to MIDDLE.
DNRS03		44 4E 52 53 30 33	–	–	Sets the VIDEO NR to HIGH.
DSGS01		44 53 47 53 30 31	–	–	Sets PLUG/PLAY setting for INPUT 2
					to PC.
DSGS02		44 53 47 53 30 32	–	–	Sets PLUG/PLAY setting for INPUT 2
					to VIDEO.
MCDS01		4D 43 44 53 30 31	–	–	Sets COLOR SPACE to RGB (VIDEO).
MCDS02		4D 43 44 53 30 32	–	–	Sets COLOR SPACE to
					COMPONENT1 (YCbCr).
MCDS03		4D 43 44 53 30 33	–	–	Sets COLOR SPACE to
					COMPONENT2 (YPbPr).
MNRS00		4D 4E 52 53 30 30	–	–	Turns MPEG FILTER OFF.
MNRS01		4D 4E 52 53 30 31	–	–	Sets MPEG FILTER to LOW.
MNRS02		4D 4E 52 53 30 32	–	–	Sets MPEG FILTER to MIDDLE.
MNRS03		4D 4E 52 53 30 33	–	–	Sets MPEG FILTER to HIGH.
PUCS00		50 55 43 53 30 30	–	–	Turns FILM MODE OFF.
PUCS01		50 55 43 53 30 31	–	–	Turns FILM MODE ON.
SFTS01		53 46 54 53 30 31	–	–	Sets the SIGNAL FORMAT to Type1.
SFTS02		53 46 54 53 30 32	–	–	Sets the SIGNAL FORMAT to Type2.
SFTS03		53 46 54 53 30 33	–	–	Sets the SIGNAL FORMAT to Type3.
SFTS04		53 46 54 53 30 34	–	–	Sets the SIGNAL FORMAT to Type4.
SFTS05		53 46 54 53 30 35	–	–	Sets the SIGNAL FORMAT to Type5.

Notes:

1.When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2.These settings are not stored in memory.

58 Runco CinemaWall SP-42/-50/-60 Owner’s Operating Manual