3. Installation
To install batteries in the remote control: | While pressing down lightly, slide |
1. Remove the battery cover from the | in the direction of the arrow. |
| |
back of the remote control. |
|
2.Insert the batteries included with the remote control. Ensure that the
polarities correctly match the | and | Two AA (R6) | |
batteries | |||
markings inside the battery |
| ||
|
| ||
compartment. |
|
|
3. Replace the battery cover.
•When installing batteries, make sure that the battery polarities are correct.
•Do not mix an old battery with a new one or different types of batteries.
•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
The remote control can be used to control the CinemaWall within the ranges shown in Figure
3.1
Remote Control
Notes on Batteries
Notes on Remote Control Operation
7 m
(23 feet)
30°
30°
Remote Sensor
Figure 3-1. Available Range of the Remote Control
Runco CinemaWall | 13 |
