Controls and Functions
1.COMBINATION IN/OUT
Used to control multiple CinemaWall monitors collectively. Use a
2.Not used.
3.AUDIO (OUTPUT) (3.5-mm stereo mini jack)
Used to output the audio of the selected source component connected to the plasma display to an AV amplifier or similar component. The output level is fixed.
4.AUDIO (INPUT 1)
Connect this jack to the audio output connector(s) of the device connected to INPUT 1.
5.AUDIO (INPUT 2)
Connect this jack to the audio output connector(s) of the device connected to INPUT 2.
6.ANALOG RGB OUT (INPUT 1) (15-pin D-Sub)
If desired, connect this output to the RGB input of a second display device.
This output is not active when the CinemaWall is off or in standby
Note mode.
7.ANALOG RGB IN (INPUT 1) (15-pin D-Sub)
For connecting components that have RGB or component output jacks such as a personal computer or external DTV decoder (a break out cable is needed for
8.DIGITAL RGB (INPUT 2) (DVI-D, HDCP-compliant)
9.
Connect the
10.DIGITAL RGB (INPUT 5) (DVI-D, HDCP-compliant)
This DVI input will process digital video 480p, 720p and 1080i signals (computer rates are not recommended).
11.AUDIO (INPUT 5 / INPUT 4 / INPUT 3)
Used for external audio input from video sources connected to Inputs 5, 4 and 3.
12.INPUT 4
Interlaced or progressive component input (480p to 1080i, 50 or 60 Hz; 480i not recommended – use INPUT 3 instead).
13.INPUT 3 (S-Video or Composite Video Input)
For connecting a VCR, camcorder, laser disc player or DVD player. Use the push button between the two connectors to select
14.EXTERNAL SPEAKER OUTPUT (RIGHT)
For connection of an external right speaker. Connect a speaker that has an impedance of 6 ohms.
15.EXTERNAL SPEAKER OUTPUT (LEFT)
For connection of an external left speaker. Connect a speaker that has an impedance of 6 ohms.
Runco CinemaWall | 9 |
