Sanyo XH4272R / CH4272R, UH2672R, C4272R Loose wiring may cause the terminal to overheat or result

Loose wiring may cause the terminal to overheat or result

WARNING in unit malfunction. A fire hazard may also exist. Therefore, ensure that all wiring is tightly connected.

When connecting each power wire to the corresponding terminal, follow the instructions on “How to connect wiring to the terminal” and fasten the wire securely with the fixing screw of the terminal plate.

1. Specifications

	Stranded wire
in.	Ring
3/8
	pressure
Strip
	terminal

Fig. 1-8

1

How to Connect Wiring to the Terminal

For stranded wiring

1)Cut the wire end with a wire cutter or wire-cutting pliers, then strip the insulation to expose the stranded wiring about 3/8 in. (Fig. 1-8)

2)Using a Phillips head screwdriver, remove the terminal screw(s) on the terminal plate.

3)Using a ring connector fastener or pliers, securely clamp each stripped wire end with a ring pressure terminal. (Fig. 1-8)

4)Place the ring pressure terminal, and replace and tighten the removed terminal screw using a screw- driver. (Fig. 1-9)

Special	Screw
washer
	Ring pressure
	terminal
Wire	Terminal plate
	Wire

Fig. 1-9

Screw and Special washer

Ring pressure terminal

SM831148

I-100