Sharp DX-B450P, DX-B350P manual PS Menu, PCL Menu, Parameter Value Default Description

			Operator Panel Menus
			Operator Panel
Menu Item	Value	Default	Description
Format	Raw	Raw	Configures how incoming print jobs are
	Normal		scanned for special binary control codes.
	Binary		RAW=no processing
			Normal = “Adobe Standard Protocol” (ASP)
			Binary = “Binary Control Protocol” (BCP)
			When Interpreter setting is Auto Switch and
			this setting is Raw, the printer will
			automatically determine the control code
			method, defaulting to Normal if no codes are
			found.
Delay Out Close	On/Off	Off	When ON, the printer will wait until the job
			is completely printed and delivered to the
			output tray before terminating the
			connection, allowing all reverse-channel
			data to be sent back to the host. This will
			cause a reduction in printer throughput.
			When OFF, reverse-channel data generated
			after the job interpretation is discarded. No
			reduction in printer throughput occurs.
Binary PS	On/Off	On	When On, the feature allows all binary codes
			to be processed by the PostScript interpreter.
			When Off, special binary control codes may
			be intercepted per the Format item setting.

PS Menu

The PS menu allows you to Print PS Errors. Items available in this menu are described below

Parameter	Value	Default	Description
Print PS Errors	On/Off	Off	Choose to either print or not print PS errors.

PCL Menu

The PCL menu allows to set a variety of PCL settings. Items available in this menu are described below

Parameter	Value	Default	Description
Orientation	Portrait	Portrait	Choose the orientation of the page.
	Landscape
Font Source	Internal	Internal	Choose the source of the default font.
	User FLASH
	Hard Disk
	Compact Flash
Font Number	0-158	50	Set the default font number.

User’s Guide 3-13