USB Setup | Sharp DX-B350P, DX-B450P specs

Operator Panel Menus

Operator Panel

Menu Item	Value	Default	Description
Binary PS	On/Off	On	When On, the feature allows all binary codes
			to be processed by the PostScript interpreter.
			When Off, special binary control codes may
			be intercepted per the Format item setting.

Factory Defaults	Yes	No	Resets the menu to factory network defaults.
	No

Connection Speed	Auto-Sense	Auto-Sense	Configures the Ethernet connection speed
	100Mbit Half		(10 or 100 Mbits/second) and
	100Mbit Full		communication mode (full or half duplex).
	10Mbit Half		The “Auto Sense” setting attempts to
	10Mbit Full		auto-negotiate this connection with the
			networking hardware, usually a switch.
			When a setting other than “Auto Sense”
			must be used, the following should be
			considered: If connected to network switch,
			the “100Mbit/Full” setting can be used. If
			connected to a hub, use the “100Mbit/Half”
			setting.

Bidirectional	On/Off	On	When this setting is “on”, the printer may
			receive and send information over the
			network interface. When this setting is “off”,
			the printer will only receive information
			over the network interface. This applies
			primarily when using printing over a “Port
			9100” connection. This setting normally
			should be left at its default setting, should
			only be turned “off” under special
			circumstances.

Wait timeout	0000-9999	0270	(In Seconds): Specifies the amount of time
			the printer will allow a network connection
			to remain open without transferring data
			before the printer terminates the connection.

SNMP On/Off	On/Off	On

HTTP Port	00000-99999	00080	Specifies the TCP port number to use for
			HTTP connection to the printers embedded
			web server.

IP Filtering	Disabled	Disabled	(available via web server only): Allows an
	Enabled		administrator to control access to printing
			and access to the embedded web server on
			the basis of IP addresses. This is a security
			feature.

USB Setup			This item allows you to set up the USB
			interface.

Interpreter	Auto Switch	Auto Switch
	PCL
	PostScript 3

3-12	User’s Guide

Image 38

Sharp DX-B350P, DX-B450P manual USB Setup

Contents

Users Guide Page Contents Embedded Web Server Windows OperationsMacintosh Operations Networking Clearing Paper Jams 10-1 AccessoriesTroubleshooting Windows Utilities 11-1 Conventions This Chapter Safety Notes Printer Orientation Name ComponentsFront View Rear View USB Internal Components Name Description Turning the Printer On Turning the Printer On and OffAvailable Printer Drivers Turning the Printer Off Paper Sizes Paper UsagePaper Sizes Paper Types Fuser Mode Restrictions Paper Types Eliminate line space Printing Envelopes Paper Type Paper Name Weight gsm Size Part Number Available Paper EPR Loading Paper Unusable Paper Loading Paper Loading Paper Loading Paper Larger Than A4/Letter Size In The Paper Tray Replacing the Toner Cartridge Replacing the Toner Cartridge Power Save Mode Understanding Printing Options Understanding Printing Options Operator Panel Features LCD Display Color When Off When On When Blinking Button Function Menu Job Library Navigating the Operator Panel Menus Panel Keys Combinations Allowed Panel Operations Printing a Configuration SummaryPanel Lock Job Library Menu Menu Item Value Default DescriptionOperator Panel Menus Job Accounting Menu Paper Menu Media Size/Type Thin Interface Menu Menu Item Value Default Description PortParallel Setup Serial Setup Network 1 Setup Netware Setup Dhcp USB Setup PCL Menu Parameter Value Default DescriptionPS Menu CR=CR/LF Parameter Values System Menu Quality Menu Functions Menu FLASH/Disk/CF Menu Date/Time Menu Category Description Parameter Value Default Description Interface SetupStatus Information Parameter Value Default Description Counters are included in Status information Installing PCL5e and PostScript 3 Drivers Windows Operations Setting Default Values User’s Guide Printing a Test Cancelling Print Jobs at the Computer Cancelling PrintingCancelling a Print Job at the Printer Accessing the Driver from an Application Saved Settings Navigating the Printer Properties Window Main Tab Selecting Number of Copies Output Destination Setting Image OrientationCollating Copies Document Style 2-Sided Printing/Duplex Pamphlet Pamphlet Portrait Landscape Poster Printing Main Tab Multiple Pages to Single Sheet N-up Finishing Source Paper TabJob Offset Printing on Special Paper Cover Sheet Selection Selecting Paper SizeCustom Size Paper Media Check Zoom SettingsAuto Tray Change Check Media Check Skip Blank Pages Manual Feed Manual AdjustmentsAdvanced Tab Quality Click Overlay Options Font Substitution Column Description Job Handling TabJob Accounting Job Retention and Storage Watermark Tab Watermark Tab Installing the Driver Macintosh Operations Installing the Driver Accessing the Driver Navigating the Driver Navigation Level Description and Available Items Navigating the Driver Navigating the Driver Navigating the Driver Accessing the EWS Embedded Web Server Navigating the EWS DNS/WINS TAB PCL Navigating the EWS Navigating the EWS Initial Setting of the Printer’s IP Address Protocols Configuring the Driver Port Configuration Printer Network ConfigurationNetwork Protocol Configuration Hub Link Speed/Duplex Configuration Notifications IP Filtering Operational Information SpecificationsIPv6 Implementation Traps Hewlett Packard Web Jet Administrative CompatibilitySupported Object Identifiers Snmp Alerts Accessories Tray module A4/Letter, 550 sheets Installing/Uninstalling the Tray ModuleChecking the contents of the tray module package Installing the Tray Module Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Uninstalling the Tray Module Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Paper tray A4/Letter, 550 sheets Paper traysDuplex module Installing the Duplex Module Uninstalling the Duplex Module Duplex module Offset Catch Tray Installing/Uninstalling the Offset Catch Tray Installing the Offset Catch Tray Offset Catch Tray Offset Catch Tray Uninstalling the Offset Catch Tray Offset Catch Tray Memory Expansion Module Hard Disk Drive Compact Flash CF Card Troubleshooting Printout Is Faded, Stained, Missing, Wrinkled, or Blurred Poor Print QualityPaper Is Output Blank or All Black Status Items to check Action User’s Guide Poor Print Quality Poor Print Quality No Power Cannot Print Printing is Not Clear Paper Incorrectly Fed Possible Cause Action Line 2 of display Error and Warning MessagesNoise Error Messages Error Message Line Possible Cause Action Error and Warning Messages Error and Warning Messages Error and Warning Messages Clearing Paper Jams At the Paper Trays User’s Guide 10-3 At the Fuser Unit User’s Guide 10-5 At the Toner Cartridge User’s Guide 10-7 At the Duplex Module Duplex at the paper exit Duplex at the interior of the top cover At the Offset Catch Tray User’s Guide 10-11 Close the rear cover to clear the Jam message Windows Utilities Font and Macro Manager Utility Status Monitor Utility PCL5 Tray Mapping Utility PCL5 Tray Mapping Utility 11-4 Index User’s Guide User’s Guide PPD User’s Guide User’s Guide Page Sharp Electronics Corporation