System Menu | Sharp DX-B450P, DX-B350P instruction

Operator Panel Menus

Operator Panel

System Menu

The System menu allows you to specify system-level operation of the printer during normal and certain error conditions. Items available in this menu are described below

Menu Item	Value	Default	Description
Factory Defaults	U.S.	U.S. for 110V	Resets the menu to factory defaults. You
	Non-U.S.	Non-U.S. for	change these defaults by changing the
		230V	options in the Operator Panel; however,
			settings in the driver will override Operator
			Panel settings.

Save Config			Saves current configuration.

Restore Config			Restores configuration.

Toner Low	Stop	Stop	Stop printing or Continue printing when the
	Continue		Toner Low message is first displayed.
			When the print cartridge is low on toner, the
			Operator Panel displays this message. The
			printer normally has about 500 pages left to
			print before the print density fades. In its
			default state, the printer will stop printing
			when it detects the toner is low. You can
			continue printing by pressing the START/
			STOP button. The printer will then continue
			printing indefinitely without operator
			intervention, even if it runs out of toner. The
			warning message remains displayed on the
			Operator Panel. If the printer is set to
			Continue after Toner Low, the printer will
			not stop and will continue to print even with
			no toner available.

Display Language	English	English	Change the language of the display
	Francais		messages.
	Deutsch
	Italiano
	Espanol
	Dutch
	Danish
	Norwegian
	Swedish

Power Save	3-120	15	Set the time in minutes since last print
			before entering Power Save mode. See
			“Power Save Mode” on page 2-17for more
			information.

Wait Timeout	00000 - 99999	00020	Increase or decrease the length of time (in
			seconds) that the printer will remain in the
			waiting state—a job is being processed, no
			end-of-file has been detected, and there is no
			more data to process. This setting applies to
			both PCL and PostScript print jobs.

User’s Guide

3-15

Image 41

Sharp DX-B450P, DX-B350P manual System Menu

Contents

Users Guide Page Contents Macintosh Operations Windows OperationsEmbedded Web Server Networking Clearing Paper Jams 10-1 AccessoriesTroubleshooting Windows Utilities 11-1 This Chapter Conventions Printer Orientation Safety Notes Name ComponentsFront View USB Rear View Name Description Internal Components Available Printer Drivers Turning the Printer On and OffTurning the Printer On Turning the Printer Off Paper Sizes Paper UsagePaper Sizes Paper Types Paper Types Fuser Mode Restrictions Eliminate line space Printing Envelopes Available Paper Paper Type Paper Name Weight gsm Size Part Number EPR Unusable Paper Loading Paper Loading Paper Loading Paper Loading Paper Larger Than A4/Letter Size In The Paper Tray Replacing the Toner Cartridge Replacing the Toner Cartridge Understanding Printing Options Power Save Mode Understanding Printing Options LCD Display Operator Panel Features Button Function Color When Off When On When Blinking Navigating the Operator Panel Menus Menu Job Library Panel Keys Combinations Allowed Panel Operations Printing a Configuration SummaryPanel Lock Operator Panel Menus Menu Item Value Default DescriptionJob Library Menu Job Accounting Menu Media Size/Type Paper Menu Thin Interface Menu Menu Item Value Default Description PortParallel Setup Serial Setup Network 1 Setup Dhcp Netware Setup USB Setup PCL Menu Parameter Value Default DescriptionPS Menu Parameter Values CR=CR/LF System Menu Functions Menu Quality Menu Date/Time Menu FLASH/Disk/CF Menu Category Description Parameter Value Default Description Interface SetupStatus Information Parameter Value Default Description Counters are included in Status information Windows Operations Installing PCL5e and PostScript 3 Drivers Setting Default Values User’s Guide Printing a Test Cancelling Print Jobs at the Computer Cancelling PrintingCancelling a Print Job at the Printer Accessing the Driver from an Application Navigating the Printer Properties Window Saved Settings Selecting Number of Copies Main Tab Collating Copies Setting Image OrientationOutput Destination Document Style 2-Sided Printing/Duplex Poster Printing Pamphlet Pamphlet Portrait Landscape Main Tab Finishing Multiple Pages to Single Sheet N-up Job Offset Paper TabSource Printing on Special Paper Cover Sheet Selection Selecting Paper SizeCustom Size Paper Media Check Zoom SettingsAuto Tray Change Skip Blank Pages Check Media Check Advanced Tab Manual AdjustmentsManual Feed Quality Font Substitution Click Overlay Options Column Description Job Handling TabJob Accounting Job Retention and Storage Watermark Tab Watermark Tab Macintosh Operations Installing the Driver Installing the Driver Accessing the Driver Navigating the Driver Navigation Level Description and Available Items Navigating the Driver Navigating the Driver Navigating the Driver Embedded Web Server Accessing the EWS Navigating the EWS DNS/WINS TAB PCL Navigating the EWS Navigating the EWS Protocols Initial Setting of the Printer’s IP Address Configuring the Driver Network Protocol Configuration Printer Network ConfigurationPort Configuration Hub Link Speed/Duplex Configuration IP Filtering Notifications Operational Information SpecificationsIPv6 Implementation Supported Object Identifiers Hewlett Packard Web Jet Administrative CompatibilityTraps Snmp Alerts Accessories Tray module A4/Letter, 550 sheets Installing/Uninstalling the Tray ModuleChecking the contents of the tray module package Installing the Tray Module Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Uninstalling the Tray Module Tray module A4/Letter, 550 sheets Tray module A4/Letter, 550 sheets Paper tray A4/Letter, 550 sheets Paper traysDuplex module Installing the Duplex Module Uninstalling the Duplex Module Duplex module Offset Catch Tray Installing the Offset Catch Tray Installing/Uninstalling the Offset Catch Tray Offset Catch Tray Offset Catch Tray Uninstalling the Offset Catch Tray Offset Catch Tray Memory Expansion Module Hard Disk Drive Compact Flash CF Card Troubleshooting Paper Is Output Blank or All Black Poor Print QualityPrintout Is Faded, Stained, Missing, Wrinkled, or Blurred Status Items to check Action User’s Guide Poor Print Quality Poor Print Quality Cannot Print No Power Paper Incorrectly Fed Printing is Not Clear Possible Cause Action Line 2 of display Error and Warning MessagesNoise Error Message Line Possible Cause Action Error Messages Error and Warning Messages Error and Warning Messages Error and Warning Messages Clearing Paper Jams At the Paper Trays User’s Guide 10-3 At the Fuser Unit User’s Guide 10-5 At the Toner Cartridge User’s Guide 10-7 Duplex at the paper exit At the Duplex Module Duplex at the interior of the top cover At the Offset Catch Tray User’s Guide 10-11 Close the rear cover to clear the Jam message Font and Macro Manager Utility Windows Utilities PCL5 Tray Mapping Utility Status Monitor Utility PCL5 Tray Mapping Utility 11-4 Index User’s Guide User’s Guide PPD User’s Guide User’s Guide Page Sharp Electronics Corporation