Sharp JW-21MN manual 107

																	(5 / 5)
Address(8)		Set contents							Setting method (value, example)
	Connection condition of slave station			Bit address	7	6	5	4	3	2	1	0			- When connecting slave station 00
	- Turn ON the corresponding bit of			007750	07	06	05	04	03	02	01	00				to 04(8) and output error code:
007750				007751	17	16	15	14	13	12	11	10
	connected station number (01 to															(Address)	(Bit pattern)
				007752	27	26	25	24	23	22	21	20
to	77(8)) from the list at right.
				007753	37	36	35	34	33	32	31	30				007750 － 00011111
	- 00(8) of master station (0 bit of
007757				007754	47	46	45	44	43	42	41	40				007751 － 00000000
	address 000750)
				007755	57	56	55	54	53	52	51	50
	At ON: Output error code															to		to
				007756	67	66	65	64	63	62	61	60
	At OFF: Do not output error code.															007757 － 00000000
				007757	77	76	75	74	73	72	71	70
007763	Whether the station number information should							00(H)					Do not output
	be output or not
			V2					01(H)					Output
				007764										When ｺ0200, set to 000200(8)
						(Octal, word)
007764																(Set by file address)
				007765
	Flag area top address on the master
to
	station
								00(H)
007767				007766
																00(H): Do not output flag
				007767
																80(H): Output flag
	Stop operation of the JW-21MN							00(H)
	Start operation of the JW-21MN							01(H)
007777	Writing to EEPROM or operation of the JW-							80(H)
	21MN/stop operation
	Writing to EEPROM or operation of the JW-							81(H)
	21MN/start operation
	Initialize parameter settings							08(H)

- For initial values of above addresses, see page 11-5 and 6.

	(2) Slave station (01 to 77(8))							(1 / 1)
		Address(8)		Set contents			Setting method (value, example)
		007720	Number of receiving bytes of relay link in save						If 0 is set, the number of bytes will be
							(Octal, byte)		the same as the number of transfer
		007721	memory function
					V2				bytes set in the master station.
		007722	Number of receiving bytes of register link in save						If 0 is set, the number of bytes will be
							(Octal, byte)		the same as the number of transfer
		007723	memory function
					V2				bytes set in the master station.
		007763	Whether the station number information should				00(H)		Do not output
			be output or not
					V2		01(H)		Output
16						007764	(Octal, word)			When ｺ0600, set to 000600(8)
		007764									(Set by file address)
			Top address of flag area on each			007765
		to
			slave station
							00(H)
		007767				007766
											00(H): Do not output flag
						007767
											80(H): Output flag
			Stop operation of the JW-21MN				00(H)
			Start operation of the JW-21MN				01(H)
		007777	Writing to EEPROM or operation of the JW-				80(H)
			21MN / stop operation
			Writing to EEPROM or operation of the JW-				81(H)
			21MN / start operation
			Initialize parameter settings				08(H)

- For initial values of above address, see page 11-22.

16-12