Sharp JW-21MN manual Case of slave station 01 to, 12-4

12

[3]In the case of slave station 01 to 77(8)

(1)Communication monitor flag

This flag is used to monitor the communication condition with other stations. Non-connected station keeps this flag as "OFF."

Flag	Condition for flag operation	Flag operation
	When the parameter address 007777(8) of each slave station is set to	ON
Own	"01(H)," and at communicating with a master station normally.
station	When the parameter address 007777(8) of each slave station is "00(H)."
flag		OFF
	When link start switch "00(H)" of the master station is OFF.

Flag	Condition for flag operation	Flag operation
Other	Normal communication with each station.	ON	Specific
	Stopped communication or unable to
			station
stationÕs	communication with each station.
		OFF
flag
	Communication monitor flag (1) of the master
			All stations
	station is turned "OFF."

(2)Operation condition monitor flag [1]

This flag is used to monitor the operation condition of each station when the communication with each station is normal.

Non-connected station keeps this flag as "OFF."

Flag	Condition for flag operation	Flag operation
Own	Communication monitor flag (1) of the own station is turned "ON."	* ON
station
		OFF
flag	Communication monitor flag (1) of the own station is turned "OFF."

Flag	Condition for flag operation	Flag operation
	Each station is operating.	ON	Specific
Other	Each station stops operation (not by an error cause).		station
stationÕs		OFF
	Communication monitor flag (1) of the own station
			All slave
flag	is turned "OFF."
			stations
	Slave station that communication monitor flag (1)	Not specified
	is turned to "OFF."

*Even if the own station PC has stopped operation normally or by an error, the JW-21MN turns "ON" this flag while communicating.

(3)Operation condition monitor flag [2]

This flag is used to monitor the abnormal stop of each station when the communication with each station is normal.

Non-connected station keeps this flag as "OFF."

Flag	Condition for flag operation	Flag operation
Own	Communication monitor flag (1) of the own station is turned "ON."	* ON
station
flag	Communication monitor flag (1) of the own station is turned "OFF."	OFF

Flag	Condition for flag operation	Flag operation
	Each station is normal.	ON	Specific
	Any of the stations is faulty (caused to be stopped
Other			station
	abnormally).	OFF
stationÕs
	Communication monitor flag (1) of the own station
flag	is turned "OFF."		All stations
	Slave station that communication monitor flag (1) is	Not specified
	turned to "OFF."

*Even if a own station PC has stopped operation normally or by an error, the JW-21MN turns "ON" this flag while communicating.

12-4