Sharp JW-21MN manual <Load

<Load>

(1)Load to the personal computer

Load the contents of the floppy diskette into the memory of the personal computer.

Select "FD TRANS."

Select "Load."

Select a file name.

Press the "Enter" key. JW-50SP

JW-21MN

Start loading into the personal computer.

(2)Stop operation of the JW-21MN

After stopping operation, load the memory contents of the personal computer into the JW-21MN.

Select "PC TRANS."

		Select "Write."
		Select "DL M. stn. PARAM." or "DL S. stn.
		PARAM."
			When the connected JW-21MN is a master station, select "DL M. stn.
			PARAM." When the connected JW-21MN is a slave station, select "DL S. stn.
			PARAM."
		After selecting "PC stop," press the "Operation
		stops" key.
	(3) Load to the JW-21MN
		After stopping operation, load the memory contents of the personal computer into the JW-
14		21MN.
		After selecting "Parameter writing," press
		the "Enter" key.
		Start loading into the JW-21MN.

(4)Start operation of the JW-21MN

After loading the parameters from the personal computer, start operation of the JW-21MN.

After selecting "Start: write EEPROM" or "Execution start," press the "Enter" key.

Start operation of the JW-21MN

14-2