Sharp JW-21MN manual 110

-Network setting

Select whether the target station for remote programming or remote monitor is on the standard network connection or on the extension network connection.

In the case below, 10 to 12(8) are standard network connections. 01 to 03(8) are extension network connections.

	(JW-50PG)
	12(8) (Junction station)
10(8)	00(8)	Target station
	11(8)
	01(8)	02(8)	03(8)

ME-NET

			0	1	2	3
		Slot number			ME-NET
<Standard network connection>
	Set "standard" in network configuration.
	Set "ME-NET" in target station model.
	Set the target station number (00 to 77(8)).
< Expansion network connection >
	Set "extension" in network configuration.
	Set "ME-NET" in junction station model.
	Set the target station number "ME-NET."
	Set the target station number (00 to 77(8)).
		(In the case of the above figure: 02(8))
	Set the junction station number (00 to 77(8)).
		(In the case of the above figure: 12(8))
	Set the junction station rack number.
		(Keep the initial value "0" )
							16
	Set the station slot number.

Set the installed slot number of the master station on the target station side. In the case of the above figure: 3.

16-15