6-2 Connector crimping procedure
Required tools:
Model :
Dice No. :
Crimping width : 10 mm
Connector:
Processing procedure
<Insert a sleeve>
Put through a sleeve to an
<Crimping contact>
Insert a contact into the internal conductor and crimp.
Put a contact into dice having a diamond shape and closely stick its end surface with the insulator and the dice. Pull the moving frame to the fixing frame side and crimp until the ratchet is removed.
(Crimping width: 2.2 mm)
Connector parts
Sleeve | Contact | Shell |
A B |
|
A:10±0.5mm | 6 |
B: 4±0.5mm |
|
Sleeve |
|
Internal conductor
Contact
Crimping dice | Fixing frame |
.1
Moving frame
Widen a little Crimp Dice blade shape |
| Crimping dice |
Insulator | Contact | |
2.2 mm |
|
|
Closed contact
*Use the crimping tool in the direction shown in the illustration right.
Using the crimping tool in the reverse direction will not crimp correctly.
Closed contact
.1
To the next page