Sharp JW-21MN manual 11-6, Value H

* Corresponding symbols on pages 11-7 to 11-9

	Set item	Parameter	Initial	Details (set range)		*
		address(8)	value(H)
	Flag area top	007764	E0	File address lower digits	Set range: See page 11-11 to
					11-12.
	address				- Initial value: 01E0(H) to
		007765	01	File address upper digits
e	(communication				000740(8) (コ 0740)	e0
	and PC operation
		007766	00	File number
	status monitor flag)
007767		80	Flag output (Yes: 80(H), No: 00(H))
	- Start/stop
	operation of the			Select "00, 01, 08, 80, 81" with hexadecimal notation.
r	JW-21MN	007777	01			---
				(See page 16-12.)
	- Write to the JW-
	21MN EEPROM.

- to are equivalent to number of page 11-13.

-Parameter addresses other than above mentioned are reserved areas and prohibited to be changed.

-When the JW-21MN is a slave station, set the top address and the number of sending bytes so that the data can be within the setting range of each area (see pages 11-7 to 11-12). When any slave stations are except JW-21MN, see the instruction manual of each device.

11

11-6