Sharp JW-21MN manual 11-19, Set connection status of slave station Bit pattern, byte

From the previous page
	Set connection status of slave station	[bit pattern, byte]
	Set "connected slave station as 01 and 02, output		007750(8)		7	6	5	4	3	2	1	0
	error code" in paramenter address 007750(8).				0	0	0	0	0	1	1	1
		Display the contents of parameter address 007750(8)
		Turn "ON" bit 0 (output error code)
		Turn "ON" bits 1 and 2 (connects slave station 01 and
	02)
			Screen display of JW-14PG
				07746	□□□□□□□□
				07747	□□□□□□□□
				I PARAM.	□□□□□■■■
				>07750

V2 Set whether the station number information should be output or not

Set whether the station number information should be output or not on the parameter address 007763(8).

007763(8)

Whether the station number information should be output or not

00(H): Do not output

01(H): Output

The station number information is output on the next byte of the flag area (24 bytes.)

This setting is valid when the parameter address is 007767(8) = 80(H).

11

To the next page

11-19