12 | Getting started |
•Press on the tray. The tray for the card is opened. You can remove the tray.
•Insert the card on the tray (ensure that the chamfered corner is in the correct position 1). Insert the tray with the card into the phone 2 until it snaps in.
Charging the batteryThe battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours.
Only use the
As an alternative, the battery can be charged via the USB port (Accessories, page 135).
Y Display during charging.
Charging time
An empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be ex- ceeded.
The charge level of the battery is only displayed correctly after an uninterrupted charging/discharging cycle. You should therfore not remove the battery unnecessarily and where possible not end the charging process prematurely.
Additional information
The power supply unit heats up when used for long periods. This is normal and not dangerous.
If the battery is removed for longer than 30 seconds, the clock must be reset.