4 Move the I cursor to the point where you want to move the selected thumbnails.
5 Press the SET/S.SEL button or the MENU knob.
The sub clips are moved to the I cursor position.
6 Repeat steps 1 to 5 as required.
7 Save the clip list (see page 118).
To adjust the In and Out points of sub clips (trim)
Proceed as follows to define the range of a scene by changing the positions of the In and Out points.
See page 103 for more information about thumbnail screen operations.
1
2
3 Select Trim Sub Clip, and then press the SET/S.SEL button or the MENU knob.
The Clip List (Trim) screen appears.
Clip List (Trim) | 001/034 | ||
| Total | 00:13:48:24 | |
| DUR | 00:00:21:27 | |
| IN |
|
|
| 01:17:33:08 | ||
| OUT |
|
|
| 01:17:55:05 | ||
|
|
|
|
TCR 01:17:33:08 CLIP 019/035 |
|
| |
| OK | ||
|
|
|
|
|
|
| Cancel |
Like the clip playback screen, this screen allows you to play and search all clips on the disc.
To display a list of In and Out point operations that you can perform
Press the MENU button.
4 When you find the point that you want to make the start point, select “IN” and then press the SET/S.SEL button or the MENU knob.
The timecode of the new In point appears in the timecode display, and the Total (total duration) and DUR (clip duration) displays are updated.
5 When you find the point that you want to make the end point, select “OUT” and then press the SET/S.SEL button or the MENU knob.
The timecode of the new Out point appears in the timecode display, and the Total (total duration) and DUR (clip duration) displays are updated.
To cue up the In point or Out point
Display the Thumbnail Menu, select Cue up Inpoint or Cue up Outpoint, and then press the SET/S.SEL button or the MENU knob.
To cancel the In point or Out point setting
Display the Thumbnail Menu, select Reset Inpoint or Reset Outpoint, and then press the SET/S.SEL button or the MENU knob. The In point or Out point setting returns to the previous value.
6 Select OK, and then press the SET/ S.SEL button or the MENU knob.
7 Repeat steps 1 to 6 as required.
8 Save the clip list (see page 118).
To delete sub clips
See page 103 for more information about thumbnail screen operations.
1 Select the clips to delete in the clip list thumbnail screen (multiple selections possible).
2 Display the Thumbnail Menu.
3 Select Delete Sub Clips, and then press the SET/S.SEL button or the MENU knob.
A message appears asking you to confirm the deletion.
4 Select OK, and then press the SET/ S.SEL button or the MENU knob.
5 Repeat steps 1 to 4 as required.
6 Save the clip list (see page 118).
Screens GUI in Operations 5 Chapter
Scene Selection (Clip List Editing) 117