Viewfinder left-to-right positioning ring

Stopper

31

2

2 Couple the viewfinder connector to the VF connector.

VF connector

Detaching the viewfinder

You can carry out this by following the attaching procedure in reverse order, but there is an additional action to take: when detaching the viewfinder from the fitting shoe, pull up the stopper.

Adjusting the viewfinder position

To adjust the viewfinder left-right position, loosen the left-right positioning ring, and to adjust the front-back position, loosen the front-to-back positioning knob.

Viewfinder left-to-right positioning ring

 

2 Chapter

Viewfinder front-to-back positioning knob

Preparations

 

Moving the viewfinder shoe up

1 Loosen the front-to-back viewfinder positioning levers and the front-to-back viewfinder positioning knobs, and then pull the viewfinder slide assembly forward.

2 Using a 2.5 mm diameter hexagonal wrench, detach the viewfinder slide assembly and handle front cover.

Attaching the Viewfinder

37