Settings Detailed and Displays Menu 6 Chapter
To display the TOP menu when another menu is displayed
Move b to “TOP” displayed at the top right of each page of the menu, and press the MENU knob. Or flick the CANCEL/PRST/ESCAPE switch repeatedly to ESCAPE until the TOP menu is displayed.
Using the USER menu (example menu operation)This section explains menu operations using the USER menu as an example. The operations are the same for the ALL, OPERATION, PAINT, MAINTENANCE, and DIAGNOSIS menus.
For details about how to operate the USER MENU CUSTOMIZE menu, see “Editing the USER menu” (page 167).
1 Set the MENU ON/OFF switch to ON.
Normally, the USER menu appears.
If it does not, turn the MENU knob to move
bto USER in the TOP menu, and press the MENU knob.
If the USER menu has been used before, the last accessed page appears. In this case, go to step 2.
If this is the first time the USER menu has been displayed, the CONTENTS page of the USER menu appears. In this case, follow the procedure below.
1Press the MENU knob. Then turn the MENU knob to move b to the desired page number.
?U00CONTENTSTOP
01.OUTPUT 1
02.OUTPUT 2
03.SUPERIMPOSE
04.LCD
05.REC FUNCTION
06.ASSIGNABLE SW
07.VF DISP 1
08.VF DISP 2
09.'!' LED
10.MARKER 1
This indicates that the menu screen can be scrolled.
2Press the MENU knob again.
The page selected in 1 is displayed. Go to step 3.
When you set items on the ALL,
OPERATION, PAINT, MAINTENANCE, FILE, and DIAGNOSIS menus, move b to the menu that contains the desired item in the TOP menu, and then press the MENU knob.
2 Turn the MENU knob until the desired page appears.
?U05 | REC FUNCTION | TOP |
CACHE/INTVAL REC: | OFF | |
DISC | EXCHG CACHE: | OFF |
3 Press the MENU knob.
band z appear.
U05 | REC FUNCTION | TOP |
CACHE/INTVAL REC: | OFF | |
DISC | EXCHG CACHE: | OFF |
4 Turn the MENU knob to move b to the desired item, and then press the MENU knob.
bchanges to z, and z changes to ?.
5 Turn the MENU knob to change the setting.
Depending on the direction of turning the knob, the setting value increases, decreases, switches between ON and OFF, and so on.
To interrupt changing the settings
Set the MENU ON/OFF switch to OFF.
By setting the MENU ON/OFF switch to ON again, the values that were displayed when you interrupted the setting operations will reappear so you can continue making settings.
6 Press the MENU knob.
zchanges to b, and ? changes to z. The selection is confirmed.
7 To continue setting other items on the same page, repeat steps from 4 to 6.
166Menu Operations