Data Setting User Loading and Saving 7 Chapter
P01 SCENE RECALL | ESC | ||
RECALL | OK? | YES | NO |
DISPLAY | MODE | : | ALL |
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD
5 To carry out the load (recall), select YES and press the MENU knob.
To cancel, press the MENU knob leaving b pointing to NO.
When loading is complete, the message “COMPLETE” appears and the access indicator goes off.
Notes
•The scene files loaded from the “Memory Stick” overwrite data saved in the camcorder memory.
•To load the scene file saved in the camcorder memory when the “Memory Stick” is inserted, return to the P00 SCENE RECALL page and load the desired scene file in the camcorder memory.
•When there is no file to be loaded (shown as “NO FILE”), an existing file of the same number is unaffected. In the example shown in step 4, MEM3 is not overwritten.
Returning the scene file settings to the standard settings
(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)
1 Display the SCENE FILE page of the FILE menu, and press the MENU knob.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select STANDARD, and press the MENU knob.
sdisplayed on the left of STANDARD
changes to x. When x changes to s once again, the settings of the camcorder are reset to the standard settings.
If you press the MENU knob again while x is displayed, the operation is cancelled and the camcorder returns to the settings before STANDARD was selected.
Jumping to a
A “Memory Stick” enables you to save user files, scene files, lens files, reference files and ALL files.
The camcorder menu system allows you to make a setting so that when a “Memory Stick” holding these files is inserted while in menu operating mode, a menu page relating to the desired file is automatically displayed on the screen. Thus you can proceed to file operation quickly. This is very convenient especially when you manage data files using “Memory Stick”s.
(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)
1 Display the MEMORY STICK page of the FILE menu, and press the MENU knob.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select MS IN > JUMP TO, and press the MENU knob.
The MS IN > JUMP TO page allows you to select one of the following settings.
Setting | Description |
OFF | Disables this function. Menu pages |
| do not change when a “Memory |
| Stick” is inserted. |
|
|
USER | Jumps to the USER FILE page. |
|
|
ALL | Jumps to the ALL FILE page. |
|
|
SCENE | Jumps to the SCENE FILE page. |
|
|
LENS | Jumps to the LENS FILE 1 page. |
|
|
REFER | Jumps to the REFERENCE page. |
|
|
USER 1 | Jumps to the USER 1 FILE page. |
|
|
3 Turn the MENU knob until the name of the desired file page appears, then press the MENU knob.
Notes
In the following cases, jumping to the target page is impossible.
•When the power is turned on after you insert a “Memory Stick”.
•When OFF is selected on the MS IN > JUMP TO page.
192Jumping to a