Error | Cause | Action |
message |
|
|
NO | No “Memory | Insert or reinsert |
MEMORY | Stick” is | the “Memory |
STICK | inserted. | Stick”. |
(flashing) |
|
|
|
|
|
MEMORY | Circuit or | Recheck, and |
STICK | “Memory Stick” | consult a Sony |
ERROR | fault. | service |
(flashing) |
| representative. |
|
|
|
FILE | The “Memory | Data saved to a |
ERROR | Stick” contains | “Memory Stick” |
(flashing) | data that cannot | using a |
| be loaded into | camcorder |
| this camcorder. | whose model is |
|
| not the same as |
|
| this camcorder |
|
| cannot be loaded |
|
| into this |
|
| camcorder. |
|
|
|
Returning the user file settings to the standard settings
(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)
1 Display the USER FILE page of the FILE menu, and press the MENU knob.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select USER PRESET, and press the MENU knob.
You can save various settings for shooting a particular scene as a scene file. By loading the scene file, you can quickly recreate setup conditions suitable for the scene. You can save up to five scene files in the camcorder memory and up to 100 scene files in a “Memory Stick” . You can also load data from the “Memory Stick” into the camcorder memory.
Data that can be saved in a scene file
You can save the following data in a scene file:
•Values adjusted using the PAINT menu
•Shutter speed settings made in the standard mode and ECS mode
•The white balance data included in a scene file depends on the SCENE WHITE DATA setting on the REFERENCE page of the FILE menu.
Saving a scene fileTo save a scene file to the “Memory Stick”, insert the “Memory Stick” into the “Memory Stick” slot before starting the following operation.
(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)
1 Display the SCENE FILE page of the FILE menu, and press the MENU knob.
For details on menu operation, see “Basic menu | Chapter | |||||
|
|
| ||||
|
|
|
| |||
|
|
|
|
| ||
?F04 SCENE FILE |
| TOP |
| 7 | ||
s1 | :STANDARD |
|
|
| ||
|
|
| Saving | |||
s2 | :STANDARD |
|
|
| ||
s3 | :STANDARD |
|
|
|
| |
s4 | :STANDARD |
|
|
|
| |
s5 | :STANDARD |
|
|
| and | |
sSTANDARD |
|
|
| |||
SCENE | RECALL | : | EXEC |
| Loading | |
SCENE | STORE | : | EXEC |
| ||
F.ID: STANDARD |
|
|
|
| ||
|
|
|
|
| User | |
To set a file ID for the data to be saved | ||||||
| ||||||
Set the file ID before going to step 2. | DataSetting | |||||
|
|
|
|
|
For details on setting the file ID, see “To set the file ID” on page 187.
Saving and Loading Scene Files 189