cDC IN (DC power input) connector (XLR type, 4-pin, male)

To operate the camcorder from an AC power supply, connect an optional DC power cord to this terminal and then connect the cord to the DC output terminal of the BC-L70, BC-M150, or another battery charger.

dDC OUT 12V (DC power output) connector (4-pin, female)

Supplies power for a WRR-860A/861/862 UHF Synthesized Diversity Tuner (not supplied) (maximum 0.5 A).

Do not connect any equipment other than the UHF synthesized diversity tuner.

eBattery attachment shoe

Attach a BP-GL95/GL65/L60S/L80S Battery Pack. Alternatively, you can attach an AC- DN2B/DN10 AC Adaptor to operate the camcorder on AC power supply.

For details about how to attach the battery or AC adaptor, see “Preparing a Power Supply” on page

35.For information about attaching a synthesized tuner, see “Attaching a UHF portable tuner (for a UHF wireless microphone system)” on page 46.

Note

For your safety, and to ensure proper operation of the camcorder, Sony recommends the use of the following battery packs: BP-GL95, BP-GL65, BP-L60S, and BP- L80S.

Accessory attachments

123 4567

8 9 0 qa qs qdqfqgqh qj qk

ql

aShoulder strap fitting

Attach the supplied shoulder strap (see page 50).

bLight fitting shoe

Attach an optional accessory such as a video light (see page 50).

cViewfinder front-to-back positioning lever

To adjust the viewfinder position in the front-to- back direction, loosen this lever and the LOCK knob. After adjustment, retighten this lever and the LOCK knob.

dViewfinder left-to-right positioning ring

Loosen this ring to adjust the left-to-right position of the viewfinder (see page 37).

eViewfinder fitting shoe

Attach an optional viewfinder.

Overview 1 Chapter

Locations and Functions of Parts and Controls 15