Alarm messages during thumbnail search, scene selection, and clip list operations
An alarm message may appear in the LCD monitor during thumbnail search, scene selection, and clip list operations. In that case, take the action indicated in the following table.
Cannot | The clip cannot be expanded into |
Expand Clip | more blocks. This alarm appears |
any Further. | when the DISP SEL/EXPAND |
| button is pressed when the number |
| of blocks is maximum, or when |
| the duration of an expanded |
| thumbnail is one frame. |
Move is
Invalid.
Shot Mark does not Exist.
Chapter does not Exist.
Rec Start cannot be Deleted.
An attempt is made to execute a Move Sub Clips operation (see page 116) when there are no sub clip in the current clip list, or when there is only one.
An attempt is made to execute a Delete Shot Mark (see page 106) operation on a clip with no shot marks recorded in.
An attempt was made to display a nonexistent chapter.
An attempt is made to delete a Rec Start with a Delete Shot Mark operation. Only Shot Mark1 and Shot Mark2 essence marks can be
Maintenance 9 Chapter
Selected Essence Mark Does not Exist.
Sub Clip is Invalid. Set Appropriate
IN/OUT
Points.
The selected essence mark does not exist.
This alarm appears in the essence mark selection screen when the specified essence mark does not exist on the disc.
The temporal relationship between the specified In and Out points in a TRIM operation (see page 117) is not correct. Reset so that the value of the Out point timecode is larger than the value of the In point timecode.
Rec Start cannot be Moved.
Command Disabled.
Clip is Locked.
deleted.
An attempt was made to move a Rec Start essence mark with a Move Shot Mark operation. Only Shot Mark1 and Shot Mark2 essence marks can be moved.
An attempt was made to execute the Format Disc command with Disable “Format Disc” set to “Disable”.
An attempt is made to delete a clip, set the clip thumbnail, or delete a shot mark when the clip is
Duration of One Clip List must be Less than 24 Hours.
No More Sub Clips can be Added to the Clip List.
Sub Clip does not Exist.
Clip List does not Exist.
The total duration of the current clip list exceeds the upper limit of 24 hours as the result of an Add Sub Clips (see page 115) or Trim Sub Clip (see page 117) operation.
The total number of the sub clips of the current clip list exceeds the upper limit of 300 as the result of an Add Sub Clips (see page 115) or Trim Sub Clip (see page 117) operation.
An attempt is made to execute a Move Sub Clips (see page 116), Trim Sub Clip (see page 117), Delete Sub Clips (see page 117), or Set Start Time Code (see page 118) operation with no sub clips in the current clip list.
An attempt is made to execute a Delete Clip List operation (see page 120) when there are no clip lists on the disc.
All Clips are Locked.
All Clips are Unlocked.
A File with the Name you Specified Already Exists. Specify a Different Name.
Set NAMING FORM to “free”
locked.
An attempt is made to execute a Lock All Clips operation when all clips are already locked.
An attempt is made to execute an Unlock All Clips operation when all clips are already unlocked.
A file name that was specified in a Set Clip Name operation already exists.
An attempt was made to rename a clip with Set Clip Name when NAMING FORM is not set to “FREE” (see page 91).
Operation Warnings
221