Preparations 2 Chapter

Handle front cover

Bolt with hexagonal hole

Viewfinder slide assembly

3 Attach the handle front cover with the bottom edge up.

To attach the viewfinder at the top

To attach the viewfinder at the bottom (factory default)

4 Attach the viewfinder slide assembly, reversing the steps of the removal procedure.

Using the BKW-401 Viewfinder Rotation Bracket

By fitting a BKW-401 Viewfinder Rotation Bracket (not supplied), you can rotate the viewfinder out of the way so that your right leg does not hit the viewfinder while you are carrying the camcorder.

1 Carry out steps 1 and 2 of the previous section “Moving the viewfinder shoe up” to detach the viewfinder slide assembly.

2 Attach the BKW-401 with the supplied bolts.

Bolts supplied with the BKW-401

3 Adjust the front-to-back position so that the arm of the BKW-401 does not touch the handle when it is raised.

38Attaching the Viewfinder