•The system frequency and resolution (HD-SDI input only) of input signals must match the current settings of this unit. Otherwise the input signals cannot be recorded.

•Only audio signals embedded in SDI signals are recorded, regardless of the settings of the AUDIO IN CH-1/CH-2/CH-3/CH-4 switches.

1 Display the SOURCE SEL page of the OPERATION menu.

 

 

 

 

 

 

 

 

 

 

 

 

For details on menu operations, see “Basic

 

 

4Chapter

 

menu operations” on page 163.

2

the MENU knob to display “EXT”.

Shooting

Select REC VIDEO SOURCE, and turn

3

Select EXT VIDEO SOURCE, and turn

 

the MENU knob to select the desired signal to be recorded.

As you turn the MENU knob, the setting

changes as follows: HDSDI 1) y SDSDI y VBS 2).

1)HDSDI cannot be selected when an SD recording format is selected.

2)Does not appear when the optional CBK-SC02 Analog Composite Input Board is not installed.

After you complete this setting, you can record the video signals of external devices by inputting the SDI signals selected in step 3 to the SDI IN (OPTION) connector.

Recording analog composite signals (with the CBK-SC02 installed)

When the optional CBK-SC02 Analog Composite Input Board is installed in this unit, you can record analog composite signals input to the GENLOCK IN connector. When an HD recording format (MPEG HD422 50, or MPEG HD420 HQ/SP) is selected, analog composite signals are upconverted to HD signals before recording.

Note

Even if the GENLOCK item on the GENLOCK page of the MAINTENANCE menu is set to OFF, the unit automatically genlocks to external video signals that are input to the GENLOCK IN connector. When GENLOCK is set to OFF, the genlock is cancelled when the input of external video signals stops and the unit switches to camera shooting.

1 Display the SOURCE SEL page of the OPERATION menu.

2 Select REC VIDEO SOURCE, and turn

the MENU knob to display “EXT”.

3 Select EXT VIDEO SOURCE, and turn the MENU knob to display “VBS”. 1)

1)Does not appear when the optional CBK-SC02 Analog Composite Input Board is not installed.

After you complete this setting, you can record external video signals by inputting analog composite signals to the GENLOCK IN connector.

94Advanced Operations for Shooting