Settings Detailed and Displays Menu 6 Chapter
Item | Description |
DISP DISC | Remaining disc capacity |
| indicator |
|
|
DISP IRIS | Iris opening indicator |
|
|
a)The viewfinder display can be also turned on or off by using the DISPLAY of the DISPLAY/ ASPECT switch on the viewfinder.
b)For detailed information on the display mode, see “Change confirmation/adjustment progress messages” (page 172).
VF DISP 2 page
Item | Description |
DISP ZOOM | Zoom position indicator |
|
|
DISP COLOR | Displays the color |
TEMP | temperature. |
|
|
DISP BATT | Displays the battery |
REMAIN a) | voltage/remaining capacity |
| of an internal battery pack |
| or an external battery |
| connected to the DC IN |
| connector. |
|
|
DISP DC IN | Displayed when the power |
| is supplied from an external |
| battery connected to the |
| DC IN connector. |
|
|
DISP 16:9/4:3 | Displays the video aspect |
ID | ratio (16:9 or 4:3). (When |
| the |
| installed.) |
|
|
DISP WRR RF | Displays the reception level |
LVL | of the wireless microphone. |
|
|
DISP REC | Displays the recording |
FORMAT | format. |
|
|
DISP CLIP | Displays clip information. |
NO(PB) |
|
|
|
DISP | Displays the timecode. |
TIMECODE |
|
|
|
a)When an Anton Bauer battery system or a BP- GL65/GL95 battery pack is installed, the remaining battery power is shown as a percentage value (%) according to the setting of this item.
INT: When one of the above batteries is installed, the remaining power is shown as a percentage value (%) when there is a change in the value or when the power is low.
AUTO: The remaining power is shown as a percentage value (%) when one of the above batteries is installed. Otherwise the voltage (VOLT) is displayed continuously.
VOLT: The voltage (VOLT) is displayed continuously.
VF DISP 3 page
Item | Description |
LOW LIGHT | Turns on and off the on- |
| screen warning that the |
| average level of the video has |
| dropped beneath a set level. |
|
|
LOW LIGHT | Sets the LOW LIGHT |
LEVEL | threshold value. |
|
|
VF BATT | Specifies the remaining |
WARNING | battery capacity level that |
| starts the flashing warning in |
| the viewfinder. |
|
|
ABSOLUTE | Turns on and off the mode |
VALUE | that displays numeric menu |
| settings as absolute values. a) |
a)This makes it possible to display settings that include reference settings, stored with STORE ALL PRESET or other functions, as absolute values.
3 Turn the MENU knob to select the desired setting (ON, OFF, or value), and press the MENU knob.
4 Repeat steps 2 and 3 until you have set all of the desired items.
Change confirmation/adjustment progress messages
You can limit or suppress the messages that give details of setting changes and adjustment progress and results by setting a display mode. The conditions under which messages are displayed and their correspondence with the display mode are as follows:
Y: Message is displayed.
N: Message is not displayed.
Message display | Message | Display | ||
condition |
| mode |
| |
|
| setting | ||
|
| 1 | 2 | 3 |
When the filter | FILTER: n (where | N | N | Y |
selection has been | n = 1, 2, 3, 4) |
|
|
|
changed |
|
|
|
|
|
|
|
|
|
172Setting the Status Display on the Viewfinder Screen and the LCD Monitor