a)Even when the MARKER item is set to OFF on the MARKER page of the USER menu, the ASSIGN 2 switch allows you to display or not to display all markers.

b)The optional CBK-SC02 Analog Composite Input Board is required for VBS signal input. The optional CBK-HD01 HD/SD SDI Input Board is required for SD-SDI/HD-SDI signal input.

c)Video momentarily becomes black and audio is momentarily muted when the digital extender is switched on and off.

d)This does not appear if nothing is assigned in the Assign menu.

Note

For functions that are assigned to the ASSIGN 2 (slide-type) switch, you cannot change those settings using other menus. The function assigned to the ASSIGN 2 switch takes precedence over the menu setting.

3 Select the desired function, and press the MENU knob.

The function is assigned, and the ASSIGNABLE SW page appears again.

Operation of the ASSIGN 1/2/3/4 switches when UA01 to UA10 are assigned

When an on/off switchable function (or menu item) is assigned to one of the ASSIGN 1/2/3/4 switches, each time the switch is pressed toggles the function on or off.

When another type of menu item is assigned, pressing the switch displays the item and its setting value on the viewfinder screen.

You can then change the setting by pressing and turning the MENU knob.

The viewfinder screen display disappears approximately three seconds after the last operation.

Setting power saving functions

You can limit the function of some output connectors to save power consumption.

(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)

1 Display the POWER SAVE page of the

OPERATION menu, and press the MENU knob.

For details on menu operations, see “Basic menu operations” on page 163.

2 Select the desired item, and press the MENU knob.

You can set the following items on the POWER SAVE page.

Item

Description

ETHERNET/

Enables or disables the

USB

network connector and USB

 

connector.

i.LINK(FAM) a) Enables or disables the i.LINK connector (FAM

function).

REC AUDIO

Puts the AUDIO OUT

OUT

connectors in EE or SAVE

 

mode.

 

 

TEST OUT

Switches the TEST OUT

SAVE

connector power saving

 

function on and off.

 

ON: No signals are output if

 

a cable is not

 

connected.

 

OFF: Signals are always

 

output, regardless of

 

whether a cable is

 

connected.

 

 

a)The unit must be powered off and on again to enable changes to this setting.

3 Turn the MENU knob to select the desired setting, and press the MENU knob.

4 Repeat steps 2 and 3 until you have set all of the desired items.

Setting the color temperature manually

You can manually adjust the value of the white balance by setting the color temperature.

(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)

1 Display the WHITE page of the PAINT menu, and press the MENU knob.

For details on menu operations, see “Basic menu operations” on page 163.

2 Select the desired item, and press the MENU knob.

You can set the following items on the WHITE page.

Settings Detailed and Displays Menu 6 Chapter

Adjustments and Settings From Menus 181