kAUDIO SELECT
Select the audio level adjustment method for each of audio channels 1 and 2.
AUTO: Automatic adjustment
MANUAL: Manual adjustment
lAUDIO IN
AUDIO IN
Select the audio input signals to be recorded on audio channels 1 and 2.
FRONT: Audio input signals from the microphone connected to the MIC IN connector
REAR: Audio input signals from an audio device connected to the AUDIO IN
WIRELESS: Audio input signals from the UHF portable tuner (not supplied) if it is installed
AUDIO IN
Select the audio input signals to be recorded on audio channels 3 and 4.
F (FRONT): Audio input signals from a microphone connected to the MIC IN connector
R (REAR): Audio input signals from an audio device connected to the AUDIO IN
W (WIRELESS): Audio input signals from the UHF portable tuner (not supplied) if it is installed
Left side and upper section
1 | 1Chapter |
| |
2 | Overview |
|
3 4 5
SDI IN | GENLOCK |
|
(OPTION) | IN | TC IN |
TEST | TC |
|
OUT | OUT |
|
67
aASSIGNABLE 3/4 switches
You can assign the desired functions to these switches on the ASSIGNABLE page of the OPERATION menu.
Nothing is assigned to these switches when the camcorder is shipped from the factory (equivalent to a selection of OFF in the menu).
For details, see “Assigning functions to ASSIGN switches” on page 178.
bLid of the disc compartment
This opens when the EJECT button on the top panel is pressed. Press the side of the lid to close.
cSDI IN (OPTION) connector (BNC type)
This is an input connector for the optional CBK- HD01 HD/SD SDI Input Board. When the CBK- HD01 is installed, the unit can record
dGENLOCK IN (genlock signal input) connector (BNC type)
•This connector inputs a reference signal when the camera is to be genlocked or when timecode is to be synchronized with external equipment.
Locations and Functions of Parts and Controls 27