Chapter2 Preparations

Preparing a PowerSupply

For safety, use only the Sony battery packs and AC adaptors listed below.

•BP-GL95/GL65/L60S/L80S Lithium-ion Battery Pack

•AC power using the AC-DN2B/DN10 AC adaptor

Using a battery pack

When a BP-GL95/GL65/L60S/L80S Battery Pack is used, the camcorder will operate continuously for the time shown below.

Model name

Operating time

BP-GL95

Approx. 120 minutes

 

 

BP-GL65

Approx. 75 minutes

 

 

BP-L60S

Approx. 75 minutes

 

 

BP-L80S

Approx. 100 minutes

 

 

Note

The battery pack operating time depends on the frequency of use of the battery pack, and the ambient temperature when used.

Before use, charge the battery pack with a charger suitable for each battery.

For details on the battery charging procedure, refer to the battery charger operation manual.

Note on using the battery pack

A warm battery pack may not be able to be fully recharged.

To attach the battery pack

1 Press the battery pack against the back of the camcorder, aligning the line on the side of the battery pack with the matching line on the camcorder.

1

2

1BP-GL95/GL65/L60S/L80S

2Align these lines.

2 Slide the battery pack down until its “LOCK” arrow points at the matching line on the camcorder.

1

2

1“LOCK” arrow

2Matching line on the camcorder

Note

If the battery pack is not attached correctly, the terminal may be damaged.

To detach the battery pack

Holding the release button in, pull the battery pack up.

Preparations 2 Chapter

Preparing a Power Supply 35