Operation limitations during recording
Item | Description | |
(i.LINK) | Cannot be used. | |
|
| |
S400 connector |
|
|
|
| |
Time code | The internal time code | |
| generator runs in | |
| regardless of how the | |
| ||
|
| |
Audio signals | Not recorded. | |
|
|
|
Playback control | • | Auto Interval Rec mode and |
buttons |
| the consecutive mode of |
|
| Manual Interval Rec mode |
|
| The EJECT, F REV, F FWD, |
|
| NEXT, PREV, PLAY/PAUSE |
|
| and STOP buttons are disabled. |
|
| To use these buttons, stop |
|
| recording by pressing the REC |
|
| START button or the VTR |
|
| button on the lens. |
| • | The single shot mode of |
|
| Manual Interval Rec mode |
|
| The F REV, F FWD, NEXT, |
|
| PREV, PLAY/PAUSE, and |
|
| STOP buttons are disabled. To |
|
| use these buttons, exit the |
|
| Interval Rec mode by pressing |
|
| the EJECT button. |
|
| |
Menu operations | The settings of the Interval Rec- | |
| related items on the REC | |
| FUNCTION page of the | |
| OPERATION menu cannot be | |
| changed. To change the settings, | |
| do either of the following. | |
| • | Auto Interval Rec mode and |
|
| the consecutive mode of |
|
| Manual Interval Rec mode |
|
| Stop recording by pressing the |
|
| REC START button or the VTR |
|
| button on the lens. |
| • | The single shot mode of |
|
| Manual Interval Rec mode |
|
| Exit the Interval Rec mode by |
|
| pressing the EJECT button. |
|
| |
When the | • When you set the POWER | |
camcorder power |
| switch to OFF, the camcorder |
is switched off |
| will switch off by itself after |
|
| disc access has continued for a |
|
| few seconds to record the |
|
| picture data stored in memory. |
| • If you remove the battery, | |
|
| unplug the DC cable, or cut |
|
| power to the AC adaptor, picture |
data stored before recording stops (a maximum of ten seconds) may be lost. Take care when replacing the battery.
Auto Interval Rec mode settings and shooting
To make settings
1 Display the REC FUNCTION page of the OPERATION menu.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select CACHE/INTVAL REC, and turn the MENU knob to display “A.INT”.
005 REC FUNCTION | TOP |
|
| ||
CACHE/INTVAL | REC: | A.INT |
|
| |
TAKE TOTAL TIME : | 5MIN |
|
| ||
| |||||
REC TIME | : | 5SEC |
|
| |
: | OFF |
|
| ||
DISC EXCHG CACHE: | OFF |
| 4 Chapter | ||
|
|
|
| ||
As you turn the MENU knob, the setting | |||||
Shooting | |||||
changes as follows: OFF y CACHE y | |||||
|
A.INT y M.INT.
3 Select TAKE TOTAL TIME, and turn the MENU knob to select the desired total time for shooting.
As you turn the MENU knob, the setting changes as follows: 5MIN y 10MIN y 15MIN y 20MIN y 30MIN y 40MIN
y50MIN y 1H y 2H y 3H y 4H
y5H y 7H y 10H y 15H y 20H
y30H y 40H y 50H y 70H y
100H.
Here MIN means minutes (5MIN is 5 minutes) and H means hours (1H is one hour).
4 Select REC TIME, and turn the MENU knob to select the desired time to be recorded on the disc.
As you turn the MENU knob, the setting changes as follows: 5SEC y 10SEC y 15SEC y 20SEC y 30SEC y 40SEC
y50SEC y 1MIN ... 85MIN. Here SEC means seconds (5SEC is 5 seconds) and MIN means minutes (1MIN is one minute).
You cannot set a REC TIME that is more than one thirtieth of TAKE TOTAL TIME.
Advanced Operations for Shooting 83