To automatically select the same audio as on channels 1 and 2
On the
1
2
3
4
5
6
1F: The audio signal from the front
microphone is recorded.
2R: The audio signal input to the AUDIO IN CH1 connector is recorded.
3W: The audio signal of the wireless microphone is recorded.
4F: Same as with the CH3 switch.
5R: The audio signal input to the AUDIO IN
CH2 connector is recorded.
6W: Same as with the CH3 switch.
Note
When the LINE/AES/EBU/MIC switch is set to LINE or MIC, the audio signals recorded on audio channels 3 and 4 are not affected by the XLR automatic detection function. They are determined by the settings of the AUDIO IN
Adjusting the audio recording levels
To adjust automatically
Set AU CH34 AGC MODE on the
To adjust manually
1 Set AU CH34 AGC MODE on the
2 Set AUDIO CH3 LEVEL (for audio channel 3) and AUDIO CH4 LEVEL (for audio channel 4) on the
page of the MAINTENANCE menu to
FRONT.
The levels of audio channels 3 and 4 can now be adjusted with the MIC LEVEL control.
To set to a fixed value
In step 2 of the previous procedure “To adjust manually”, set the menu items to FIX.
Shooting for Settings and Adjustments 3 Chapter
Adjusting the Audio Level 67