Attaching the Viewfinder

2 Chapter

 

Preparations

Release button

 

 

Notes

 

• During recording and playback (while the ACCESS

 

indicator is lit), be careful never to remove the battery

 

pack.

 

• Make sure to power the camcorder off before replacing

 

the battery pack.

Using AC power

When using the AC-DN10 AC adaptor

Mount an AC-DN10 on the camcorder in the same way as a battery pack, then connect to the AC power supply.

The AC-DN10 can supply up to 100 W of power.

To an AC outlet

36

Attaching the Viewfinder

 

 

CAUTION

When the viewfinder is attached, do not leave the camcorder with the eyepiece facing the sun. Direct sunlight can enter through the eyepiece, be focused in the viewfinder and cause fire.

Note

The viewfinder is supplied separately.

Attaching the HDVF-20A/C35W

Note

When attaching the viewfinder, make notes of the following points.

•Be sure to the power off the camcorder before coupling the viewfinder connector to the camcorder’s VF connector. If you make this connection when the camcorder power is on, the viewfinder may not function properly.

•Couple the viewfinder connector firmly to the camcorder’s VF connector. If the coupling is loose, noise may appear on the video or the tally light may not operate properly.

For more information about the connection of the viewfinder and camcorder, contact a Sony service representative.

1 1 Loosen the viewfinder left-to-right positioning ring, 2 attach the viewfinder to the viewfinder fitting shoe, and 3 tighten the viewfinder left- to-right positioning ring.