4

2 Chapter

 

 

 

Preparations

1

2

3

 

1AUDIO IN CH-1/CH-2 switches

 

2To DC OUT connector

 

 

3To AUDIO IN CH1 or CH2 connector

 

4LINE/AES/EBU/MIC switch

 

Connecting line input audio equipment

Connect the audio output connector of the audio equipment that supplies the line input signal to the AUDIO IN CH1 or CH2 connector.

Switch settings

Set the LINE/AES/EBU/MIC switch for the channel to which the audio signal source is connected to “LINE”.

Selecting the audio inputs to be recorded

•With the XLR connection automatic detection function being off (the factory default setting): A signal must be selected for audio recording by setting the AUDIO IN CH-1 or CH-2 switch to “REAR” depending on which of the AUDIO IN CH1 and CH2 connectors is used for connecting the external audio equipment.

•With the XLR connection automatic detection function being on: When a cable is connected to the AUDIO IN CH1 or CH2 connector, the input from that connector is automatically selected for audio recording, regardless of the setting of the AUDIO IN CH-1 or CH-2 switch.

The XLR connection automatic detection function can be switched on or off on the AUDIO-1 page of the MAINTENANCE menu, with the REAR XLR AUTO item.

48 Preparing the Audio Input System

4

1 2 3

1AUDIO IN CH-1/CH-2 switches

2To AUDIO IN CH1 or CH2 connector

3Audio equipment

4LINE/AES/EBU/MIC switch