Settings Detailed and Displays Menu 6 Chapter
2 Select one of
A x mark appears over the first character position in the string, and characters can now be input.
017 | SHOT ID | TOP |
| ||
: ssssssssssss |
| |
: ssssssssssss |
| |
: ssssssssssss |
| |
QRSTUVWXYZ[ | ]abcdefghijk |
lmnopqrstuvwxyz~ | |
INS DEL RET | ESC END |
3 Enter or change the shot ID.
When you are entering the whole shot ID, go to 2.
1Turn the MENU knob to move the x mark to the character which you want to change, then press the MENU knob.
017 | SHOT ID | TOP |
| ||
: ssssssssssss |
| |
: ssssssssssss |
| |
: ssssssssssss |
| |
QRSTUVWXYZ[ | ]abcdefghijk |
lmnopqrstuvwxyz~ | |
INS DEL RET | ESC END |
2Turn the MENU knob until the x mark moves to the character position that you want to select, then press the MENU knob.
017 | SHOT ID | TOP |
:?+ |
| |
| ||
: ssssssssssss |
| |
: ssssssssssss |
| |
QRSTUVWXYZ[ | ]abcdefghijk |
lmnopqrstuvwxyz~ | |
INS DEL RET | ESC END |
4 Repeat step 3 for each of the remaining characters.
5 When the input is complete, turn the MENU knob to move the x mark over
END, then press the MENU knob.
This ends the input, and returns to the original SHOT ID page.
To insert a space
In step 3 above, move the x mark over INS, and press the MENU knob.
To cancel inserting a space, move the x mark over RET, then press the MENU knob.
To delete a character
In step 3 of “Setting the shot ID” (page 175), move the x mark over DEL, and press the MENU knob.
This deletes the character under the x mark in the shot ID row.
To cancel deleting the character, move the x mark over RET, and press the MENU knob.
To cancel changing shot ID
Before executing step 5 of “Setting the shot ID” (page 175), move the b mark over ESC, then press the MENU knob or flick the CANCEL/ PRST/ESCAPE switch to ESCAPE.
Displaying the status confirmation screens
You can confirm the settings or status of the camcorder on the LCDs by displaying the following four screen.
ABNORMAL <!> screen
This window allows you to confirm why the ! (warning) indicator lights in the viewfinder. You can use the ‘!’ LED page of the OPERATION menu to set whether or not the ! (warning) indicator lights.
SYSTEM screen
This screen displays information such as the system frequency, the recording format, whether output from the TEST OUT connector is on or off, and the type of output signal.
FUNCTION screen
This screen displays the functions assigned to the ASSIGN switches, the detection level, and other information.
AUDIO STATUS screen
This screen allows you to confirm the following items related to audio.
•Audio bit rate
•Setting condition of DF/NDF
•Type of front microphone
176Setting the Status Display on the Viewfinder Screen and the LCD Monitor