Sony PDW-700 manual 23

1	2					3			4							5
																O V E R
		HD422		50				5 9 . 9 i			2 4 b i t					0
6		1080			P B			N D F	E X T - L K			H O L D
				. . .												10
		01 .				23 .			45 .			15
7
					H			M I N		S E C		F R M					20
8			W A R N I N G : H U M I D													30
9																40
		D I S C E										B					d B
													1	ST	2			3 4
		B A T T E										F
0																P E A K
								LCD monitor
7
9
0
							Monochrome LCD

aResolution

Indicates the resolution of HD output video.

Indication	Resolution (horizontal × vertical)
1080	1080 lines (1920 × 1080)
720	720 lines (1280 × 720)

bVideo format

Indicates the format of video being currently played back or recorded.

Indication	Format	Bit rate
HD422 50	MPEG HD422	50 Mbps
HD420 HQ/SP/	MPEG HD420	35/25/18 Mbps
LP a)
IMX 50/40/30	MPEG IMX	50/40/30 Mbps
DVCAM	DVCAM	25 Mbps

a) LP is playback only.

cSystem frequency

Indicates the system frequency of video being currently played back or recorded.

If NTSC AREA is selected 1)

Indication	Field or frame	Scan mode
	rate
59.9i	59.94 fields per	Interlace
	second
59.9P	59.94 frames per	Progressive
	second

Indication	Field or frame	Scan mode
	rate
29.9P	29.97 frames per	Progressive
	second
If PAL AREA is selected 1)
Indication	Field or frame	Scan mode
	rate
50i	50 fields per	Interlace
	second
50P	50 frames per	Progressive
	second
25P	25 frames per	Progressive
	second

1)Selected by COUNTRY setting on the FORMAT page of the OPERATION menu (see page 135).

Note

There may be no indication displayed when this unit cannot identify the system frequency, for example, when playing back a disc recorded with other equipment.

dAudio format

Indicates the format of audio being currently played back or recorded.

Indication	Quantization bit rate/sampling
	frequency
24bit	24 bits/48 kHz
16bit	16 bits/48 kHz

eAudio level indicators

Indicates the audio recording or playback levels of channels 1 to 4.

fStatus display

PB: Appears during playback.

NDF: Appears when non-drop-frame timecode is selected.

EXT-LK:Appears when the internal timecode generator is locked to an external signal input to the TC IN (timecode input) connector.

HOLD: Appears when the internal timecode generator is stopped.

gTime counter display

Switches displays of time counter, timecode, and user bits, depending on the position of the DISPLAY switch.

When the HOLD/CHAPTER button is pressed to hold the timecode value, the timecode is displayed in the format shown below. When the HOLD/CHAPTER button is pressed again to

Overview 1 Chapter

Locations and Functions of Parts and Controls 23