Message display | Message | Display | ||
condition |
| mode |
| |
|
| setting | ||
|
| 1 | 2 | 3 |
When the gain | GAIN: n (where n | N | N | Y |
setting has been | = |
|
|
|
changed | 3dB, 6dB, 9dB, |
|
|
|
| 12dB, 18dB, 24dB, |
|
|
|
| 30dB, 36dB, 42dB) |
|
|
|
|
|
|
|
|
When the setting of | WHITE: n (where n | N | N | Y |
the WHITE BAL | = A CH, B CH, |
|
|
|
switch has been | PRESET) or ATW: |
|
|
|
changed | RUN |
|
|
|
|
|
|
| |
When the | DCC: ON (or OFF) | N Y | Y | |
OUTPUT/DCC |
|
|
|
|
switch has been set |
|
|
|
|
to DCC ON or OFF |
|
|
|
|
|
|
|
|
|
When the shutter | :SHUTTER: | N | Y | Y |
speed and mode | 1/100 (or 1/125, |
|
|
|
setting has been | 1/250, 1/500, 1/ |
|
|
|
changed a) | 1000, 1/2000, ECS) |
|
|
|
When the black or | E.g. AWB : OK | N | Y | Y |
white balance has |
|
|
|
|
been adjusted |
|
|
|
|
|
|
|
|
|
a)This is also displayed for about 3 seconds when the SHUTTER selector is set to ON.
Changing the display mode
1 Display the VF DISP 1 page of the OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select VF DISP MODE, and press the MENU knob.
3 Select the desired display mode, and press the MENU knob.
Setting the marker displaySwitch the display of the center and safety zone markers on or off, and select whether the area indicated by the safety zone marker is 80%, 90%, 92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn the MENU knob to move b to the desired item.)
1 Display the MARKER 1 or MARKER 2 page of the OPERATION menu, and press the MENU knob.
For details on menu operations, see “Basic menu operations” on page 163.
2 Select the desired item, and press the MENU knob.
You can set the following items on the MARKER 1 and MARKER 2 pages.
MARKER 1 page
Item | Description |
MARKER | To hide all markers, set to |
| “OFF”. |
|
|
CENTER | To display the center marker, |
| set to “ON”. |
|
|
CENTER | Selects the position of the |
MARK | center marker. |
|
|
SAFETY | To display the safety zone, set |
ZONE | to “ON”. |
|
|
SAFETY | Selects the safety zone range |
AREA | (80%, 90%, 92.5% or 95%). |
|
|
ASPECT | To display the aspect marker, |
| set to “ON”. |
|
|
ASPECT | Selects the aspect mode (15:9/ |
SELECT | 14:9/13:9/4:3/1.85/2.35). |
|
|
ASPECT | To make the areas out of the |
MASK a) | selected aspect marker dimmer, |
| set to “ON”. |
ASPECT | To set the mask level, when the |
MASK LVL | ASPECT MASK is set to |
| “ON”. |
|
|
100 % | To display the effective pixel |
MARKER | area, set to “ON”. |
|
|
a)The ASPECT MASK setting affects the viewfinder and LCD monitor display. In the following cases, it also affects the VBS signal.
•When TEST OUT SELECT on the OUTPUT 1 page is set to VBS.
•When both TEST OUT SUPER on the OUTPUT 1 page and SUPER(MARKER) on the SUPER IMPOSE page are set to ON.
ASPECT MASK is ignored for displays in the viewfinder when the following are true.
•TEST OUT SELECT on the OUTPUT 1 page is set to
•TEST OUT SELECT on the OUTPUT 1 page is set to
Settings Detailed and Displays Menu 6 Chapter
Setting the Status Display on the Viewfinder Screen and the LCD Monitor 173