stored in the corresponding memory. If the WHITE BAL switch is set to PRST, the
Chapter | automatic white balance adjustment function |
| ||
|
| |||
| does not operate. |
|
| |
1 | BLK: Adjusts the black set and black balance |
| ||
automatically. |
|
|
| |
Overview |
|
|
| |
Adjusts the input level of audio channels 1, 2, 3 |
| |||
| g MIC (microphone) LEVEL control |
| ||
| and 4. |
|
|
|
| For details, see “Adjusting the Audio Level” on page |
| ||
|
|
|
| |
|
|
|
| |
| Right side (near the front) |
|
| |
|
|
|
|
|
| 1 | 2 3 4 | 5 |
|
6 7 8 9
0qa qs
|
| MENU |
ON/ | OFF | CANCEL/PRST |
SEL | ON | ESCAPE |
STATUS |
|
|
OFF |
|
|
qd
qf
aASSIGN (assignable) 1/2 switches
You can assign the desired functions to these switches on the ASSIGNABLE SW page of the OPERATION menu.
Nothing is assigned to these switches when the camcorder is shipped from the factory (equivalent to a selection of OFF in the menu).
For details, see “Assigning functions to ASSIGN switches” on page 178.
bCOLOR TEMP. (color temperature) button
Press to light the button and change the color temperature for shooting. You can use this as an ASSIGN (assignable) switch (see page 178).
cALARM (alarm tone volume adjustment) knob
Controls the volume of the warning tone that is output via the
ALARM
Minimum Maximum
dMONITOR (monitor volume adjustment) knob
Controls the volume of the sound other than the warning tone that is output via the
eMONITOR (audio monitor selection) switches
By means of combinations of the two switches, you can select audio that you want to hear through the
Position of
Position of | Audio output |
switch |
|
Channel 1 audio | |
|
|
MIX | Channels 1 and 2 mixed |
| audio (stereo) a) |
Channel 2 audio | |
| |
Position of | |
|
|
Position of | Audio output |
switch |
|
Channel 3 audio | |
|
|
MIX | Channels 3 and 4 mixed |
| audio (stereo) a) |
Channel 4 audio | |
|
|
18Locations and Functions of Parts and Controls