Standard Horizon CP150C owner manual Changing the Display Palette, Changing Light and Contrast

2.9 CHANGING THE DISPLAY PALETTE

The color of the screen has 4 selections: Normal, Classic, Night and Sunlight. To change the Palette:

Press “MENU” + GENERAL SETUP + “ENTER” + PALETTE + “ENTER” + SUNLIGHT (or other) + “ENTER”

2.10 CHANGING LIGHT AND CONTRAST

Press and immediately release “PWR” (do not press and hold the key, or the POWER OFF message will appear): moving the ShuttlePoint knob to the left/right will change the intensity of the light and moving the knob up or down will change the LCD contrast.

2.11 ADJUSTING THE TIME

The time information supplied by the GPS satellites is in Universal Time Coordinates (UTC or Greenwich England Mean Time). To change the chart plotter to read the correct time, first you must figure out the offset and if it is daylight savings time. For example on the West coast of the United States or Pacific Standard Time the offset needed would be –08:00 or –07:00 for daylight savings time, Eastern Standard Time –05:00 or –04:00 for daylight savings time.

To change press “MENU” + GENERAL SETUP + “ENTER” + TIME REFERENCE + “ENTER” , select +00:00, change the number for the desired offset.

Figure 2.11 - Adjusting Time

NOTE

This map is for time offsets in standard time. For daylight saving time subtract one hour from the offset time shown.

Page 18 GPS Chart 150C