Standard Horizon CP150C owner manual Deleting a Route

Sorting User Points: “MENU” + USER POINTS LIST + “ENTER” + SORT + “ENTER”

Allows sorting of the User Points names. After pressing “ENTER” a window is shown with two options: A-Z ASCENDING and Z-A DESCENDING. Choose the preferred order and press “ENTER” . The User Points are sorted by the selected order.

Selecting User Points List: “MENU” + USER POINTS LIST + “ENTER” + MODE + “ENTER”

Allows the display mode of User Points on the Chart page. A window is shown with six options: SHOW (User Points is shown on the charts), ICON (only the User Point icon is shown; User Point label is hidden), HIDE (the User Point is not shown), SHOW ALL (all User Points are shown on the charts), ICON ALL, (all the User Points icon are shown; User Points label are hidden), HIDE ALL (all User Points are hidden). The selected mode for the User Point appears in the last right column of the table (see Figure 3.8.6).

Deleting selected User Point: “MENU” + USER POINTS LIST + “ENTER” + DELETE + “ENTER”

Deletes the selected User Point. A warning message appears, select YES and press “ENTER” (“CLEAR” otherwise). If the selected point is the Target (Destination), the chart plotter shows a warning message saying that the function cannot be executed. The Target must be deactivated before deleting the selected point. Also if the selected point belongs to the active Route (the Route with the Target) it cannot be deleted.

Deleting All User Points: “MENU” + USER POINTS LIST + “ENTER” + DELETE ALL + “ENTER”

Deletes all User Point in the list. A warning message appears, select YES and press “ENTER” (“CLEAR” otherwise). If one of the points is the Target (Destination), the chart plotter shows a warning message saying that the function cannot be executed. The Target must be deactivated before deleting the selected point. Note that deleting User Points also Routes are deleted.

Sending User Points: “MENU” + USER POINTS LIST + “ENTER” + SEND + “ENTER”

Allows sending all User Points in the list to an external device (depending on selected port).

Receiving User Points: “MENU” + USER POINTS LIST + “ENTER” + RECEIVE + “ENTER”

Allows reading User Points from the NMEA input port (NMEA sentence WPL and RTE).

3.8.7 Deleting a Route

Place cursor on Waypoint. Press “ENTER” . Select DELETE ROUTE and press “ENTER” . A window is opened: select YES and press “ENTER” to confirm (select NO and press “ENTER” otherwise).

GPS Chart 150C Page 39