Standard Horizon CP150C owner manual Technical 3.14.0System Test, RAM Menu, RAM Test, RAM Clear

3.14TECHNICAL 3.14.0System Test

If you have connected your chart plotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your chart plotter, the extended auto-test should help determine the problem. Make sure the chart plotter is turned Off. While pressing and holding any other key, turn the chart plotter On. A new menu will appear on the display:

Figure 3.14.0 - System Test

Use the ShuttlePoint knob to select the desired test. Choose the test press “ENTER” . To exit from any submenu press “CLEAR” . To exit from the System Test turn Off the chart plotter.

3.14.0.0 RAM Menu

This test verifies the integrity of the memories and if desired during this test all the internal memory can be erased and the default setting restored.

Figure 3.14.0.0 - RAM Menu

RAM Test

To verify the integrity of the RAM. If on the screen the message ERROR appears, the RAM is physically damaged. Contact your Dealer or STANDARD HORIZON.

RAM Clear

To clear internal memory. If the chart plotter exhibits unusual operations, or appears to be malfunctioning, it may be possible to correct the problem by clearing RAM.

Page 46 GPS Chart 150C