NOTE
Due to the cartography contained in the
Measure DST & BRG: allows measuring the Distance and Bearing between two points.
Ship Icon: select the preferred icon (among 5 choices) to display ship on the Chart page.
Cursor Speed: select the preferred speed among Low, Medium and High for the cursor in the Chart page and in the menu page.
Units of Measure: allows customization of Disatnce, Speed, Depth and Altitude.
3.15.4.4 Fix
Fix Correction: Enables / Disables the correction of the received fix position.
Compute Correction: Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position and selecting this option, the error is calculated and internally memorized for appropriate correction, but not applied.
Correction Offset: Allows entering the correction to the received fix position.
Position Filter: Attenuate the fix position error.
Speed Filter: Attenuate the fix position error.
3.15.4.5 Navigate
Map Datum: Allows selecting any datum reference from the ones available on the chart plotter. The chart plotter allows selecting about 100 different datum. The default Map Datum is WGS84.
Map Orientation
-North Up: The top of the map is fixed to North.
-Course Up: The top of the map is oriented to the current Course value.
-Track Up: The top of the map is oriented to the current Navigation Leg. Map Orientation Resolution: 5 – 30 degrees defines the maximum variation of
the reference angle after which the map changes its orientation.
Coordinate System
-Ddd mm.mm: Degrees minutes and hundreds of minutes.
-Ddd mm.mmm: Degrees minutes and thousands of minutes.
-Ddd mm.sss: Degrees minutes and seconds.
-TD: TD function allows converting GPS coordinates to
-Select Loran Chain
-Select Slave1
GPS Chart 150C |
| Page 63 |
|
