Declutter:Enables / Disables the Declutter. The default setting is Off. When it is On removes overlapping text (e.g. Names, Spot Soundings etc.).
3.15.4.3 General Setup
Language: Allows changing the language for menus and data screens.
Keypad beep: Enables / Disables the audible beep.
Palette: Normal / Classic / Night / Sunlight. Sets the Palette to be used to enhance the visibility of the screen depending on the surrounding light condition.
-Normal: is recommended when the chartplotter is not exposed to the direct sunlight. When this mode is set the maps are displayed in order to use colors as similar as possible to the ones used in the original paper charts.
-Classic: is also recommended when the chartplotter is not exposed to the direct sunlight. The colors used are the same colors used on NT cartography.
-Night: is recommended when the environment is dark in order to reduce the glare of the display. The chartplotter displays maps and screen in darker colors.
-Sunlight: is designed to enhance the visibility of the screen when the chartplotter is exposed to the sunlight. The maps are much brighter than in the other modes and the depth areas are filled with white color so different depth areas are not easily distinguishable.
Auto Info: select the type of Automatic Info (Off/On Points/On All). See Section 3.15.5.
Time Line: Sets the type of display for the Time Line. The Time Line is a graphical indication of the direction in which the vessel is heading. The Time Line origin is the vessel’s position so the time line movement is synchronized with the vessels Icon. Time Line course is given by the value of COG (Course Over Ground) and its length is proportional to the SOG (Speed Over Ground). When the Time Line is set to Infinite the line crosses the whole screen.
-Off: the Time Line is not shown.
-Value: Allows entering the Time Line length.
Time Reference: UTC / Local (Local Offset). Allows choosing UTC or Local Time display. When Local Time is set the Local Time offset can be entered.
Data Window: choose the preferred data window layout. See Section 2.15.0.
Time Format: 12 / 24 hours. Allows switching 12 or 24 hours time format.
Date Format:
Zoom Type: select the preferred mode to change chart scale: BY ZOOM and BY SCALE. When BY ZOOM is selected, pressing the “ZOOM IN” shows more detail of a smaller area, by changing the chart scale and zooming in on your display. Press “ZOOM OUT” to change the scale and show a wider, otherwise less detailed view. When BY SCALE is selected, when “ZOOM IN” or “ZOOM OUT” is pressed the chart plotter will show the zoom window: pressing the “ZOOM IN” /“ZOOM OUT” or moving the ShuttlePoint knob up/down moves the scale and bar graph, press “ENTER” to zoom to the scale. Press “CLEAR” to quit the zoom window and keep the selected chart scale.
Page 62 |
| GPS Chart 150C |
|
