Star Micronics LaserPrinter4 manual Printingin Landscapeorientation, Changingcharacterset

●Press [v] when the required paper/envelopesize is displayed on the screen.

●“Finally,press [ON LINE], which readies the Star LaserPrinter4 for printing.

Beforeyou stan printing,reffl the cassettewith the appropriatepaper.

4.6PRINTINGIN LANDSCAPEORIENTATION

If you want to change from portrait to landscape orientation for your printed page, follow this procedure, after going Off Line and pressing [PROGRAM]:

c Press [<] until you get

LAYOUT

●Press [v], which will display

ORIENTATION

s Press [v] for

Portrait@

●Pressing [<] gives

Landscape

●Pressing [v] selectsLandscape.

4.7CHANGINGCHARACTERSET

If you want to use a characterset other than that providedat the factory, followthiS procedure:

c After going Off Line and pressing [PROGRAM]

cPress [<] untilyou see

CHARACTER

sPress [v], whichdisplays,in case of the HP LaserJet11Pemulation

SOURCE R (or SOURCE C or SOURCE S)@

(SOURCE R means Resident, SOURCE C for Cartridge, and SOURCES for Soft font)

!59