Federal Communications Commission Radio Fre uency Interference

3 tatement

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause in- terference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules! which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

0 Reorient the receiving antenna

0 Relocate the computer with respect to the receiver

0 Move the computer away from the receiver

0 Plug the computer into a different outlet so that computer and receiver are on dif- ferent branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television techni- cian for additional suggestions. The user may find the following booklet, prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-

TV Interference Problems.” This booklet is available from the U.S. Government -- Printing Office, Washington, D..C., 20402, Stock No. 004-000-00345-4.

For compliance with Federal Noise Interference Standard, this equipment requires a shielded cable.

This statement will be applied only for the printers marketed in U.S.A.

Self Declaration

Radio interferences regarding this equipment has been eliminated according to Vfg lOr6/1984 announced by the DBP.

DBP has been informed about the introduction of this special equipment and has been conceded the right to examine the whole series.

It is upon the responsibility of the user to assume that his own assembled system is in ac- cordance with the technical regulations under Vfg 1046/1984.

To observe FTZ-regulations it is necessary, to establish all connections to the printer with shielded cable.

The equipment may only be opened by qualified service representatives.

This statement will be applied only for the printers marketed in West Germany.

Trademark Acknowledgement

NB-15 rafstar: Star Micronics Co., Ltd.

Apple, *‘f pple ll , Apple II+, A ple lle, Applesoft: Apple computer Inc.

Commodore C-64: Commodore 8.usmess Machmes, Inc.

Corn aq: Compaq Computer Corporation CP/& Digital Research

EasyWriter: Information Unlimited Software, Inc.

IBM Personal Computer, IBM PC: International Business Machines Corp.

Kaypro: Kay ro Corporation

Microsoft BR SIC: Microsoft Corporation

Osborne 1: Osborne Computer Corporation

WordStar: MicroPro International Corporation

TRS-80:Radio Shack, a division of Tandy Corporation

SuperCalc: Sorcim Corporation

NOTICE

•Al1 rights reserved. Reproduction of any part of this manual in any form what-

soever, without STAR’S express permission is forbidden.

@The contents of this manual are subject to change without notice.

•Al1 efforts have been made to ensure the accuracy of the contents of this manual at the time of going to press. However, should any errors be detected, STAR would

be greatly appreciate being informed of them.

•The above notwithstanding, STAR can assume no responsibility for any errors in this manual.

-

-

@Copyright 1986 Star Micronics Co., Ltd.

-

Page 2
Image 2
Star Micronics NB-15 user manual Tatement